Jump to content

Leaderboard


Popular Content

Showing most liked content on 11/13/19 in all areas

  1. 1 like
    Hi, tie contact can be used in Linear Static Analysis (STATICS) and Small Displacement Nonlinear Analysis (NLSTAT). Penalty-based and MPC-based TIE contacts are available and can be selected using CONTPRM, TIE. TopologyReconstruction-edit.hm Connectors can be used alternatively. Refer to tutorial HM-3400: Create Connectors.
  2. 1 like
    Hi @all First, i hope this is the right forum for this topic. If it isn't, please switch. I've to simulate an multiphysics coupled heat transfer + fluid cooling process (like cooling fins or spines). For that case i've to define an heat flux into the base of the solid structure. The heat is flowing through the structure and left the structure on the "water" cooled contact surface. This cause an increase of the fluid temperatur deltaT (T_in-T_out) on the outflow against to teh inflow temperature. The fluid flow is perpendicular to the heat conduction in the solid. Points I've finished: Import complex geometry into ACUCONSOLE (+meshing) Define the global problem description Define the inflow, outflow, heat source (basic BC's) Simulation of the fluid flow through the structure still open Points: Simulation of the heat conduction Define the result of the Simulation (heat cond.) as boundary for the flow simulation As i wrote in the title, at the moment I work with the ACUCONSOLE. Is Hypermesh (with the ACUsolve deck) better for multiphysics like this? How can I define old results as boundary conditions in new simulations? (current temperature/heat flux as input value for the fluid wall) Is it possible to import more than one geometry into acuconsole? (The software always want to delete the previous part when i import a second one) I hope you can help me to solve this problem. best regards Alex
×
×
  • Create New...