Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Gnokrojam

  1. Some time ago I worked with a different FEA program and that company provided as part of the documentation a list of known errors. As bugs were fixed they were removed. As bugs were found they were added. It was a very useful tool to us users. We could quickly tell if a problem was something we were doing or a shortcoming of the software. Knowledge is power! Is a list of known bugs or known errors available for Optistruct? Thank you, Phil
  2. Aha! Never mind. You go into the Springs panel where you define spring elements and go into the update panel. There you can choose the orientation method and related information. Problem solved. Thank you for the help. Writing these helped me think it through. Phil
  3. There must be a way. I used a text editor and inserted a CID into field 9 and then read that input file into HM. When I edit that card the CID field shows up with the CID I entered. Phil
  4. The Optistruct manual says that when defining a CBUSH element with coincident GA and GB one must specify a CID. (Optistruct manual, CBUSH page, Comment 5) I do not see a way of specifying a CID in HM. Editing the element has the fields for X1, X2, X3, but the there is no field 9 for the CID. How can assigning a CID to a CBUSH be done? Thank you. Phil
  5. I found the problem. CBUSHs can also be defined in the SPRINGS panel. Those take two nodes. Problem solved. One of those things you apparently just have to know. Phil
  6. I have a spider of CBARs that I want to change into CBUSHs using Hypermesh. If I use the "config edit" panel it creates 1 noded CBUSHs, since CBUSHs are created under the "masses" panel. How can I make this change? Thank you. Phil Brown
  7. I found it! In the MotionView User's Guide, in the Tutorials, in the Contact Simulation tutorials. MV-1010: 3D Mesh to Mesh Contact Simulation It outlines the mesh requirements and has a link to best practices for contact modeling. The link takes you to: MotionSolve > User's Guide > Analysis Tips: Best Practices for Running 3D Contact Models in MotionSolve. Have fun with it colleagues! Phil
  8. I've looked in the manual for this without success. Just what is a properly meshed model? Must all geometry be meshed, or only that which comes into contact? Are shells allowed? Where does the manual tell us what the contact mesh needs to be? Thank you very much. Phil
  9. Your post about deleting settings files helped me to resolve my problem with the panel area sliding right and off of the screen. Thank you for the information.

    Unfortunately, yes, I lost all of my settings. That wasn't a surprise, but is there a way to backup settings so they can be read in again?

    For example, I use the favorite panel, Star, a lot. I lost my collection of favorite panels. Is there a way to keep these and restore them quickly in the future?

    Thank you very much.

    Phil Brown, John Deere Company, USA

  10. I had two Components appear in my model and I do not know why or how they were created. The component name is in the form: ^HM_autoskin_2 The components are made of Quad elements that are the surfaces of 3-D Hex element meshes. They are the same colors of the Hex mesh components. When I export to a solver deck, the "autoskin" components do not appear in any form. I don't know if I "fat-fingered" a button without realizing it or what. I'm not doing anything I haven't done a lot before this. I am using HM v14.0 on a Windows 7 HP 8570w laptop. Thank you. Phil
  11. George, Thank you very much. Knowing that, I can continue to ignore it. (Which I suppose should have been obvious.) Again, thank you. Phil
  12. When I go to the "View" menu, the "Assembly Browser" choice is grayed out. I cannot select it and enable the "Assembly Browser." Screen shot is attached. Why can't I open the "Assembly Browser?" Thank you. Phil
  13. Very good illustrations. I think I see now. I appreciate the time you put into this. Thank you very much. Phil
  14. I found the Tools>Features panel of which you spoke. I didn't know about it, and it can be helpful. It doesn't help with vertex angles. I appreciate your help, and feeling like I'm really being dense about this, but I'm not getting it. I have attached a screen shot of a model I am working on now. I have shown the features. Maybe you can point out or describe vertex angle from it. Thank you.
  15. Ah wait, you said free edges. I have to think about that.
  16. Do I understand correctly that it is the angle between the edges of two different elements? If one had a mesh of all equilateral triangles it would be a very good mesh. All of the angles will be 60 degrees. The panel came up with a default vertex angle of 30 degrees. That would require that all of those equilateral triangles be divided again. That doesn't make sense to me. Either I don't understand the vertex angle, or it should be set to something greater than 60 degrees.
  17. I am creating a triangle shell mesh for tet-meshing. When using Automesh to mesh elements with QI optimize, one can specify a feature angle and a vertex angle. The feature angle is the angle between element normals. What about the vertex angle? The manual says: " Whenever an element vertex exceeds this angle while adhering to features, the element will be split into two elements with correspondingly smaller vertices." The default angle in the field is 30 degrees. Triangles will always have an angle that is greater than 30 degrees. Someone else in the manual it is described as being similar to the feature angle. I can't find an illustration or more detailed explanation of vertex angle. Can someone clarify this for me, please? Thank you. Phil
  18. Good questions, Rahul. I took a simple model and started doing the same things to it that I've done to the real model. The model was written out of HM into an Abaqus input file. Since I do not know how to set everything up in HyperMesh for an Abaqus run, I sometimes make changes with a text editor. Then, I later sometimes read the edited input file back into HyperMesh. This morning I realized the obvious. Each time I read the file back into HM there are prefixes being added. I attached a .bmp. In the left column is the file the first time I wrote it out from HM. In the right column is the file the second time I wrote it out. Knowing what is happening, I went back to the import input file menu, but I still don't see what I have done to cause this prefix to be added. I hope this clarifies my question. Again, if you can point me to where in the documentation this is explained, I will appreciate it. Thank you. Phil HM-Naming.bmp
  19. I'm using HyperMesh 12.0 and Abaqus 6.12-4. I've been away from FEA for a couple of years. My entities are now getting names like: NSET = S2;S2;S2;S2;S2;PreTensNodes and P2;P2;P2;P2;P2;FuelTank and G37;G27;G27;G32;G47;S:WashrLo Then I run Abaqus and get errors that a certain surface doesn't exist. It doesn't exist because its name got a new prefix in the model data, but not in the history data. Somewhere in the documentation I saw how names are organized between the semi-colon and colon. I can't find it now. I've looked and looked. Can someone please point me to where in the manual this naming convention is explained. Is there a way of turning it off so that I can use names like: plate, gusset, door, Fred, Wilma, Moe, Larry, CurlyJoe? Thank you. Phil
  20. I got sidetracked. I have an example. I will post it when I figure out how. I don't have time right now. I think I am seeing tesselation lines. I just saw them mentioned in something I read today. I didn't even have to edit this part. I usually use STEP files from Pro-E to transfer geometry. This time I tried an IGES file. It looked like this when I first plotted it. Thank you for the feedback.
  21. Well, no. Actually, I just tried again so I could tell you what the error message is and it works. Maybe I hadn't "restarted" my laptop after the installation? Anyway, it works now. Thank you for asking. Phil
  22. Is SimLab supposed to be a better version of BatchMesher? Is anyone using SimLab? (I don't see a SimLab Forum. This is as close as it gets.) I got a new computer today and had to re-install HyperWorks. I installed SimLab to give it a look, but it wouldn't even start up. Using: HW 12.0, SimLab 12.1, running on an HP EliteBook 8570w Windows 7 Enterprise, Version 6.1 (Service Pack 1) Is anyone else having better luck with SimLab? Thank you. Phil
  23. Whenever I edit surfaces, especially trimming, I end up with surfaces that look translucent with strange lines going across it. If they mesh, they sometimes look like one surface on top of other with different meshes. How can I avoid this? Thank you. Phil
  24. Mario, Thank you. You taught me two things that will help me with many tasks. 1) I had looked all over for a filter, but didn't think of right click. 2) I had tried to shift-select and cntrl-select without success. Your reply told me that it was do-able. I found my error. I had been clicking on the geometry and FE icons. I learned you must click on the collector name. Thank you very much for the help. Phil
  • Create New...