Jump to content

ahilan

Members
  • Content Count

    68
  • Joined

  • Last visited

About ahilan

  • Rank
    Advanced User

Profile Information

  • Are you University user?
    No

Recent Profile Visitors

1207 profile views
  1. Hello, I couldn't distinguish between intersection and penetration. In the model (image in the link below), i could see the penetration of elements, still the penetration check tool shows no penetration, only intersections. My doubt is whether penetration is checked only with certain normal angle? https://drive.google.com/file/d/0B2rIYPnVjYNESWxNcVdveExXSW8/view?usp=sharing Ahilan
  2. Thanks for the reply. I use HV 12. So the problem is with the version.
  3. Hello Prakash, Filedrop is not working. Is it ok if i upload in a external server (Google drive) and share ? Ahilan A
  4. Hi Anyone please clear my doubt. Ahilan A
  5. The following is the vonmises stress contour plot i get in a component with predominant bending load. https://drive.google.com/file/d/0B2rIYPnVjYNEVjdfcHNQTjBXNVE/view?usp=sharing I get discrete distribution concentrated at each elements. (I used 10 noded tetra). What could be wrong here ?
  6. Where can i find the Output Request Expression Syntax details for MV ? (Documentation only seems to explain the general mdl format for output)
  7. Is there tool / procedure to check any interference of mesh of two different components ? Ahilan
  8. I get the following error when i setup the model in Abaqus proile and convert to optistruct profile. It shows ontact surfaces not selected. But the conversion tool don't ask for any surface selection. Error Snap in the link below https://drive.google.com/file/d/0B2rIYPnVjYNEeGo4TDg1NUJqNzg/view?usp=sharing Ahilan
  9. When i create only nodes (no mesh) in HM, and i import to MV. But the nodal points didn't get transferred. what approach to follow ?
  10. I will only do rigid body analysis. In that case, only the surface 2D mesh for a 3D solid body is enough ?
  11. Is it possible to measure contact pressure / pressure distribution between two rigid bodies in motion using MV?
  12. How to define point anywhere in the imported CAD ? Imported CAD body seems to have random mesh. And its only able to choose / define points in those particular nodes. How to refine that mesh Or is it has anything to do with CAD exporting / settings ? Note: i use MV 12 Please find the image below. https://drive.google.com/file/d/0B2rIYPnVjYNEMlk2cGVIOFI0Wlk/view?usp=sharing Ahilan
  13. What is the actual purpose of loading .tcl file before importing coordinates?
  14. How to request max principal stress output in each integration point ? I need to have the corresponding numerical value of max princial stress at all integration point in a model for plotting. Note: I solve in abaqus.
×
×
  • Create New...