Jump to content

BeMa86

Members
  • Content Count

    23
  • Joined

  • Last visited

Everything posted by BeMa86

  1. Thank you for answer NSKRTLUS. It dosn´t work.
  2. Hello, is it possible to make a video that show the deformation in steps with a changing element stresses? I mean for every deformationstep the stress, that belong to it. My current Video show the deformation in different steps but the element stresses are the max stresses. Thank you for help.
  3. Hello, how can i create an parabolic pyram 13 or an parabolic tetra 10 - mesh? I can create an linear tetra 4 or an linear pyram 5- mesh with the volume-tetra-mesh-panel but i can´t find how to change the elments to parabolic. Thanks for help BeMa
  4. BeMa86

    Weight

    Hello, how can i check the weight of my model? Materialproperty [ROH] is assigned. Best regards BeMa
  5. Now i create a .mpcf file. In Hyperview i can´t display the Nodeforces.... what kind of resultreader i need for an .mpcf file? I use HyperMesh Result Reader. where can i display the nodeforces??? contour?
  6. I try this.... file:///C:/Program%20Files/Altair/12.0/help/hwsolvers/hwsolvers.htm?mpcforces.htm
  7. Hello, is it possible to outpute the Elementforce of RBE2 elemens and make a vectorplot like SPCF? In ControlCards >> Global_Output_Request>> ELFORCE the forceresults are not available for RBE2-Elements. I test a vectorplot of cbeam-elements but it dosn´t work like SPCF.... In ELFOCE i select FORMAT(1)=H3D and for ELFORCE_V1(1)=all, all other options are blank. Any mistake? Best regards BeMa
  8. Hello, i modelling a contact between shell-elements and solids. I create a control card >>GLOBAL_OUTPUT_REQUEST>>CONTF with the selected options: FORMAT(1)=h3d TYPE(1)=ALL OPTION(1)=All How can i display the Contactforces in HyperView? Best regards BeMa
  9. Hello together, i have a nonlinear static model setup of shell elements. How can i display the plastic strain? Best regards BeMa
  10. BeMa86

    bearing

    Hello, i want to design a bearing. In this bearing is a bolt with a radial force. How can i realize the herzsche compression? best regards Bene
  11. Hello, i dont understand, how i assign the property with the card image PCONT? Is it use like other properties: rightklick/assign?
  12. I delet all these fils. Start HM and load the .hm file. It dosn´t work. I export a solver deck to Nastran and a Frind can change the offsets. So the Model is ok. Is there a adjustment, how prevent the card edit option?
  13. Hallo Rahul, thank you for your answere. I closed Hm and delet the the settings files. Then i opened the model and try it again. It dosn´t work. Altair Home: C:/Program Files/Altair/12.0 Updates Information: ------------------------------------------------------------ hwdesktop12.0.110 hwdesktophelp12.0.110 hwsolvers12.0.220 hwsolvershelp12.0.220 sT9.5_hw12.0 Versions: ------------------------------------------------------------ hgtrans.exe: 12.0.110.40 (Sep 13 2013) hmopengl.exe: 12.0.110.40 (Sep 13 2013) hst_ng.exe: 12.0.110.40.500186 (Sep 13 2013) hstbatch_ng.exe: 12.0.110.40.500186 (Sep 13 2013) hstdss.exe: 12.0.110.40.500186 (Sep 13 2013) hvp.exe: 12.0.110.40 (Sep 13 2013) hw.exe: 12.0.110.40 (Sep 13 2013) hwmbdmodel.dll: 12.0.110.40 (Sep 13 2013) hwplot.dll: 12.0.110.40 (Sep 13 2013) hwplot3d.dll: 12.0.110.40 (Sep 13 2013) hwpost.dll: 12.0.110.40 (Sep 13 2013) hwtext.dll: 12.0.110.40 (Sep 13 2013) hwvideo.dll: 12.0.110.40 (Sep 13 2013) hwx.exe: 12.0.110.40 (Sep 13 2013) templex.exe: 12.0.110.40 (Sep 13 2013) System Information: ------------------------------------------------------------ Machine: amd64 OS: windows Windows NT 6.1 User: Maresch Hardware: ----------- Processor: Intel® Xeon® CPU E5-1620 0 @ 3.60GHz (8 CPUs), ~3.6GHz System Manufacturer: FUJITSU System Model: CELSIUS M720 POWER Total Physical Memory: 16384MB RAM Operating System: ------------------- Machine name: RP-TB546 Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130708-1532) Graphics/Display/OpenGL: --------------------------- Card name: NVIDIA Quadro 2000 Chip type: Quadro 2000 Display Memory: 681 MB Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um Driver Version: 9.18.13.2723 Current Mode: 1920 x 1200 (32 bit) (59Hz)
  14. Hello, i have shell-elements and i assign them an offset. Mesh/card edit/elements It works very well. Now i can´t edit the offset. I don´t now whats wrong because i did it the same way at last. The config is quad4 and the type is cquad4 there are equal to the element. If i try to edit only one element there pop up the error message: One entity selected, ignoring coniguration and type specification. ???? The element i try to edit ist exactly a quad4. If i use the "select tool" (yellow butten: elems) in the card edit panel by using the option by config with config= quad4 and type=cquad4, the element was selected. Magic or adjustment in hm??
  15. Thanks a lot. I change the distance of the two sheets and now it works perfectly. The distance now is bigger and the offsets of the elements are adepted. I don´t understand the reason for convergence.
  16. Hello, i have a problem with my non-linear simulation. In my Assambly are two sheets of shell elements, which are connected with skrews (realised with beam and rbe2-Elements). Between these sheets i designed "contact surfaces", according this discription: http://training.altairuniversity.com/analysis/structural/nonlinear/contact-analysis-bolted-flange-nlstat/ My run summary told me: A fatal error has occurred during computations: *** ERROR # 941 *** NON-CONVERGENT NONLINEAR ITERATIONS FOR SUBCASE 6 Suggestions: ANALYSIS COMPLETED. Results are available. I beleive, that the displacements are to big for the solver. Can this be serious? My Questions: Is it true, that the Solver put the Force step by step higher? How can i read the intermediate data out? How can i change the convergence criterion? best regards
  17. Hello together, i have ba2-Elements with a PBeam property. I need the radial force of each element to design a bearing seat. Is this the correct way: Post/Contour/CBAR Shear Plane-1B or -2 B? (Have anybody a list, what kind of datatype which results are? I don´t now, what CBAR Shear Plane-1B is. Is it the force or the strain in shear direction?) ) Or is a Conrol Card needed like by SPCF-Forces? With best regards BeMa86
  18. @ Mario: Thanks for your help. It works very well. @ Rahul: I know these technique, but it was al little spring element with the wrong property (bar 2). Now its a spring element and it works. @ tinh: If you mesh a surface and not a midsurface, you can uns offsets to consider the distance between these surfaces by solving.
  19. Hello together, I am a new user. I know how to change the offset of my shell elements and it works very well. How can i display the offsets of my shell elements? This can be importand for me, if i want to delet some of the elements and create them new. A nother question is how to display emlements by an ID? Example: by solverrun i become an errormessage.: *** ERROR 14: Missing property # 7 referenced by element # 28430. Thank you for help sorry for my broken english
×
×
  • Create New...