Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by soumitra2102

  1. Dear All, I have seen these limitations already on the official website. However, I have a tricky query. Let me elaborate. I need to use Ansys Fluent (because our school has the license). But I hate their Pre-processing. I know how powerful is HyperMesh with meshing (but our school does not have the license). Hence, my intention is to use HyperMesh (Student Version) for meshing of my models (LARGE models with very very high element number). And then export the mesh finally to Ansys Fluent. So, my question is, can I use the Student version to mesh and export large models (without any limitation on number of elements)? I will not be solving the large models any HypperWorks solver. Thank You.
  2. I don't have either. However, before downloading and installing I need to know that. Anyway, thanks
  3. Hi, Does, anybody know if there is any limitation on number of elements/nodes creation and (then) export through HyperWorks 2017 Student Edition- HyperMesh programme? In other words, can I create mesh for a geometry with more than 500,000 nodes (for CFD model) and then able export it for another (say Ansys Fluent) solver through the Students versions HyperMesh? Thank You. -Soumitra
  4. Well, I got another solution for a more practical type of component. Check out the video tutorial for the part.
  5. Sir, What if I do all preprocessing for a forming setup in any one of the HyperForm userprofiles and I want to export it to Abaqus Explicit Solver deck? Can I do that? I tried, however I found everything (material, loads, etc.) empty except for the parts (meshed instances) in Abaqus CAE- View Model GUI.
  6. Sir, What is the significance of the mating part option in user process?
  7. Sir, When we use the Autoprocess forming setups, for binder row, how is the use of the column 'Type'? When I toggle the option to 'Gap', the three columns as highlighted in the attached picture are available. Please elaborate how to fill those cells.
  8. Yes Sir This is it, But how did you do this ?, I mean the wire frame part (undeormed) is simultaneously shown with the deformation simulation?
  9. Actually I'm having a hose which is deforming diametrically. And I want to show/report how a particular point is undergoing a relative displacement (deforming) with respect to its original position (undeformed).
  10. Yes, the nodes would be the same (BY ID) as the deformed part is derived from the undeformed part (Mesh 'd be same (no adaptivity used)) However wile trying relative displacement from measure panel, it enables to select only those nodes which are their in current model file and does not permit to select a node (nothing but the same node-by ID) from another model file. How about if I could have two components (deformed and undeformed) in a single model file?
  11. Sir, I couldn't see that option in my case. Even after applying the contour plots (not done while taking the above snapshot)
  12. Sir, How can we access a deformed model and its undeformed shape at a time? I have first loaded the model and result file (.odb file) simultaneously and in second step only the model (same .odb file) with 'overlay' option checked. I want to measure relative displacement between two nodes in which one node is on the deformed shape and one node is on the undeformed shape. However it is not letting me select node from another model file which is not current.
  13. Sir, By default, in measures I see dynamic mim/max option to see deformation of nodes having min/max deformation magnitude at the LAST STEP of simulation which can show their deformation values progressively with the simulation steps. However, how can I get the dynamic deformation values of particular node of interest, no matter whether it is having maximum or minimum overall deformation?
  14. Here's the link https://onedrive.live.com/redir?resid=3DBF7631FB497452!60945&authkey=!ACrjGVOhhoVrBEA&ithint=file%2chm However this contains all mesh organized into a single component, as done in the video. Sorry for that
  15. Finally I got the solution, Check out the video tutorial for the same part. maybe this can be a preliminary tutorial for starting (complex) hex meshing using HyperMesh
  16. What are the significance of the following files which are generated after a successful job completion of Incremental Radioss simulation. 0000.rad 0001.rad .rst T01 .sty
  17. Sir, Is it possible to combine hex mesh, like we do for 2D elements? In my case, I have a layer of hex mesh, the elements of which have been split (every single element is split across all of its side using 3D>Split>Solid elements (split into hexa)pannel). Now I want to combine pairs of two elements within each layer separately. How is it possible.
  18. Now, how about this (concave) fillet. Please guide me to hex mesh this component.
  19. Sir, How to mesh a component with fillets using hex meshing. The component is like as shown in figure.
  20. Sir, I have a component which is an assembly of 3 different parts. It's a torsional vibration damper consisting of inner mounting part and outer rim both composed of metal which bounded by a rubber part in between them. I want to perform a linear static analysis of the assembly with loads applied on the inner part and constraints applied on outer rim. I have meshed each part with perfect alignment with the adjacent part mesh at the contacting surfaces (so that the each node at the contacting surfaces will be commonly shared by the adjacent parts). The parts are meshed with solid mapping of 2nd order quad elements. Also I have checked that there are no free edges in between the parts contacting region. Being different parts (material), I have applied separate property collector to each one of them. What else should I need do to avoid an unconstrained linear static analysis simulation? I mean how do I convey the software (solver) that the inner and outer parts are bound mutually through the rubber?
  • Create New...