Jump to content

swapnilsahu0111

Members
  • Content Count

    30
  • Joined

  • Last visited

About swapnilsahu0111

  • Rank
    Advanced Member

Profile Information

  • Are you University user?
    Yes

Recent Profile Visitors

1518 profile views
  1. Hi I am doing the shape optimization and the solver is running but not as I want. 1.)I want the solver to change the shape at the wall where the two pipes have been joined but it was not doing so. I have attached the screen shot. 2.)I have a confusion. In order to optimize the design by changing the shape ; there needs to be a initial and output condition defined which will be taken under consideration while trying to optimize the design. Is their any way the initial and output conditions (in terms of velocity or inlet and outlet pressure) could be defined from the one which is self calculated by the Acuconsole? 3.) How can I select the y plus value. I have done the analysis without selecting the y plus value, is there any requirement of selecting the y plus value in my analysis. Thanks
  2. I have a confusion. In order to optimize the design by changing the shape ; there needs to be a initial and output condition defined which will be taken under consideration while trying to optimize the design. Is their any way the initial and output conditions (in terms of velocity or inlet and outlet pressure) could be defined from the one which is self calculated by the modules previous to Optistruct?
  3. Hi I am doing the shape optimization and the solver is running but not as I want. I want the solver to change the shape at the wall where the two pipes have been joined but it was not doing so. I have attached the screen shot.
  4. I am getting this error in performing shape optimisation. Cai I know why I am getting this? ************************************************************************ ** ** ** ** ** OptiStruct 12.0.212 ** ** ** ** Design and Optimization Software ** ** from Altair Engineering, Inc. ** ** ** ** ** ** Windows 7 Workstation SP1 (Build 7601) MEN-PC5209 ** ** 8 CPU: Intel® Xeon® CPU E5-1620 0 @ 3.60GHz ** ** CPU speed 3600 MHz ** ** 9650 MB RAM, 32617 MB swap ** ** ** ** Build tag: 0688910_5533120_Ce64RBW8UH12M:83688-000 4000000004000 ** ************************************************************************ ** COPYRIGHT © 1996-2013 Altair Engineering, Inc. ** ** All Rights Reserved. Copyright notice does not imply publication. ** ** Contains trade secrets of Altair Engineering, Inc. ** ** Decompilation or disassembly of this software strictly prohibited. ** ************************************************************************ *** OptiStruct defaults set from: install config file: C:\Program Files\Altair\12.0\/hwsolvers/optistruct.cfg. NOTE # 9199 MSGLMT=STRICT is active, all messages will be printed. You can suppress some less important warning messages by use of MSGLMT=BRIEF or UNREF (in config file or in the input data). 1 PARAM(s) were set: CHECKEL ,NO *** See next message about line 2109773 from file: F:/New optimisatin/1/run1.fem "CTETRA 762986 0 246586 9426 9422 9423" This line was interpreted as: 2109773:CTETRA, 762986, 0, 246586, 9426, 9422, 9423 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109774 from file: F:/New optimisatin/1/run1.fem "CTETRA 762985 0 265163 181999 182000 132385" This line was interpreted as: 2109774:CTETRA, 762985, 0, 265163, 181999, 182000, 132385 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109775 from file: F:/New optimisatin/1/run1.fem "CTETRA 762984 0 216315 252454 206422 212897" This line was interpreted as: 2109775:CTETRA, 762984, 0, 216315, 252454, 206422, 212897 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109776 from file: F:/New optimisatin/1/run1.fem "CTETRA 762983 0 170857 207340 199941 243653" This line was interpreted as: 2109776:CTETRA, 762983, 0, 170857, 207340, 199941, 243653 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109777 from file: F:/New optimisatin/1/run1.fem "CTETRA 762982 0 142391 244486 149158 142392" This line was interpreted as: 2109777:CTETRA, 762982, 0, 142391, 244486, 149158, 142392 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109778 from file: F:/New optimisatin/1/run1.fem "CTETRA 762981 0 134198 246452 222030 220510" This line was interpreted as: 2109778:CTETRA, 762981, 0, 134198, 246452, 222030, 220510 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109779 from file: F:/New optimisatin/1/run1.fem "CTETRA 762980 0 507899 547696 490468 538040" This line was interpreted as: 2109779:CTETRA, 762980, 0, 507899, 547696, 490468, 538040 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109780 from file: F:/New optimisatin/1/run1.fem "CTETRA 762979 0 252555 190641 155900 278723" This line was interpreted as: 2109780:CTETRA, 762979, 0, 252555, 190641, 155900, 278723 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109781 from file: F:/New optimisatin/1/run1.fem "CTETRA 762978 0 204486 298774 210444 198028" This line was interpreted as: 2109781:CTETRA, 762978, 0, 204486, 298774, 210444, 198028 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2109782 from file: F:/New optimisatin/1/run1.fem "CTETRA 762977 0 331341 263043 309313 267951" This line was interpreted as: 2109782:CTETRA, 762977, 0, 331341, 263043, 309313, 267951 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** More of ERROR messages # 1000 were suppressed... *** See next message about line 2119772 from file: F:/New optimisatin/1/run1.fem "CTETRA 752987 0 235663 114018 114015 113997" **************** Too many error messages. Aborting run. Current limit is 10000. Use "MSGLMT" control card to change this value. ************************************************************************** Following warning messages appeared too many times and were suppressed: 1000 Total of 9989 repeat error message(s) were suppressed. To see more messages use "MSGLMT" control card in the data or config file. **************************************************************************
  5. Hi Prakash, I have sent it to your dropbox.
  6. Hi .. Can you share me the altair link where I can post the file.
  7. Hi Prakash I have defined the objective, Can I send you .hm file if possible. As minmax function and dobjrefs. Please checkout the screenshot.
  8. I am doing the shape optimisation and I am getting the responce error. H:/New folder (2)/Opti/sh2.fem "DSYSID 1 Shapeopt" *** ERROR # 1000 *** in the input data: Incorrect data in field # 4. I have given the responce from... responses>response name> response type = static stress> Prop(select components,inlet,outlet,wall)> create. But its not working.
  9. Hi Rahul, I have assigned the property. Can I share you the .hm file if possible? Thanks Swapnil
  10. ************************************************************************ ** ** ** ** ** OptiStruct 13.0.210 ** ** ** ** Design and Optimization Software ** ** from Altair Engineering, Inc. ** ** ** ** ** ** Windows Workstation (Build 9200) METANEEL ** ** 4 CPU: AMD A8-6410 APU with AMD Radeon R5 Graphics ** ** CPU speed 2000 MHz ** ** 3101 MB RAM, 8895 MB swap ** ** ** ** Build tag: 0751393_5533130_Ce64RBW8UH12M:96526-000 4000000004000 ** ************************************************************************ ** COPYRIGHT © 1996-2015 Altair Engineering, Inc. ** ** All Rights Reserved. Copyright notice does not imply publication. ** ** Contains trade secrets of Altair Engineering, Inc. ** ** Decompilation or disassembly of this software strictly prohibited. ** ************************************************************************ *** OptiStruct defaults set from: install config file: C:\Program Files\Altair\13.0\/hwsolvers/optistruct.cfg. NOTE # 9199 MSGLMT=STRICT is active, all messages will be printed. You can suppress some less important warning messages by use of MSGLMT=BRIEF or UNREF (in config file or in the input data). NOTE # 1929 Created RAM scratch area: total size 200 MB. *** See next message about line 2467 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2199 0 751 591 774 592" This line was interpreted as: 2467:CTETRA, 2199, 0, 751, 591, 774, 592 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2468 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2200 0 751 591 592 804" This line was interpreted as: 2468:CTETRA, 2200, 0, 751, 591, 592, 804 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2469 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2201 0 804 695 924 751" This line was interpreted as: 2469:CTETRA, 2201, 0, 804, 695, 924, 751 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2470 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2202 0 804 695 751 591" This line was interpreted as: 2470:CTETRA, 2202, 0, 804, 695, 751, 591 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2471 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2203 0 847 691 669 831" This line was interpreted as: 2471:CTETRA, 2203, 0, 847, 691, 669, 831 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2472 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2204 0 883 565 699 877" This line was interpreted as: 2472:CTETRA, 2204, 0, 883, 565, 699, 877 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2473 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2205 0 701 642 566 641" This line was interpreted as: 2473:CTETRA, 2205, 0, 701, 642, 566, 641 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2474 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2206 0 701 923 884 641" This line was interpreted as: 2474:CTETRA, 2206, 0, 701, 923, 884, 641 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2475 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2207 0 884 838 739 701" This line was interpreted as: 2475:CTETRA, 2207, 0, 884, 838, 739, 701 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** See next message about line 2476 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2208 0 691 810 669 673" This line was interpreted as: 2476:CTETRA, 2208, 0, 691, 810, 669, 673 *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. Expected INT > 0, found INTEGER (0). *** More of ERROR messages # 1000 were suppressed... ************************************************************************ RESOURCE USAGE INFORMATION -------------------------- MAXIMUM MEMORY USED 100 MB IN ADDITION 200 MB RAMDISK AREA WAS ALLOCATED IN MEMORY MAXIMUM DISK SPACE USED 1 MB ************************************************************************ ************************************************************************ COMPUTE TIME INFORMATION ------------------------ EXECUTION STARTED Mon Aug 03 09:39:48 2015 EXECUTION COMPLETED Mon Aug 03 09:39:49 2015 ELAPSED TIME 00:00:00 CPU TIME 00:00:00 ************************************************************************ *** PROGRAM STOPPED: FATAL ERROR(s) ENCOUNTERED. ***** END OF REPORT ***** For Useful OptiStruct Tips and Tricks, go to the URL: http://www.altairhyperworks.com/tips.aspx ************************************************************************ Following warning messages appeared too many times and were suppressed: 1000 Total of 2740 repeat error message(s) were suppressed. To see more messages use "MSGLMT" control card in the data or config file. ************************************************************************ There were 2750 error messages during input processing. The first message is repeated below: *** See next message about line 2467 from file: H:/New folder (2)/Opti/shape.fem "CTETRA 2199 0 751 591 774 592" *** ERROR # 1000 *** in the input data: Incorrect data in field # 3. ************************************************************************
  11. Hi Rahul, I was not permitted here to share the out file. regards, Swapnil
  12. Hi, I am doing the simple optimisation, which has inlet at one side and outlet on other. I have done CFD tetra mesh and want to perform a free shape optimisation. I am getting the error on running the solver. I have attached the screenshot.
  13. Hi Rahul, I have done the shape optimisation with the model.But it gives the error on running the simulation that, error in input processing. I think there is some mistake in meshing but please let me know what I have done wrong. I have attached the screenshot. I can send you the final .hm file if you want, which was saved before running the solver.
  14. Hii... Sorry for the above post and inconvinience. It has been moved. Thanks alot.
  15. Hi Rahul, I have tried assigning the inlet/ outlet surface and it doesnot been created. Why?? It is a solid then why I am getting the problem with this model? Method: (Shift+F11)> selected surface(by face)> destnation component(as inlet)> move it does not move.
×
×
  • Create New...