Jump to content

yukesh.aero

Members
  • Content Count

    65
  • Joined

  • Last visited

About yukesh.aero

  • Rank
    Advanced User

Profile Information

  • Gender
    Male
  • Country
    India
  • Interests
    FEA ,CAE , SIMULATION
    SCRIPTS
  • Are you University user?
    Yes

Recent Profile Visitors

1932 profile views
  1. You consider angle loading like case example like load value 1000 n 60 degree , For consider point load at point Sin 60 *1000 is the vertical load case Cos 60 *1000 is the horizontal load case
  2. @Q.Nguyen-Dai hm 14 ,win 7 64 bit, i5 process , 4gb Ram , Asus Motherborad @akshaysp.09 i am not understood hm Restart @tinh i chnage but not working
  3. Hello,George, it's not working, check my attachment video Rec_29.avi
  4. hi everyone, i have bugg in hypermesh i can not view discrete element in my part . i add temp node to showing how to rectify that one give thanks
  5. Hi please watch my video, sorry for the long delay
  6. Hello all , is there any tutorials available in batch mesh (2d)
  7. Hello Sir , Here i attached model , how to mid surface in that model , i have knowdlege made mid surafce in 40 % and dont send the HM tutorials,i already practised , check give me valuable solutions mid_suface.hm Exercise1.igs
  8. Hello sir , i want assign in different thickness like plastic model l , how to assign it and also can any one what this yellow shade data need
  9. hello @Prakash Pagadala i check constraints correctly assigned , please check it .hm file here i attached , give me solution Sorry for the multiple post in same question wrongly upload its again and again
  10. hello Every one , i am doing optimization in topology ,i got some error in below how to rectify that one , and also i check mesh connectivity and rigid link and constraint all , but i have same error will be repeated how to rectify and give me solution . here i attached .hm file *** ERROR # 312 *** In static load case 1 the compliance is negative or large 1.07647e+008. Optimization/buckling analysis cannot be performed. due to possible rigid body mode. INFEASIBLE DESIGN (AT LEAST ONE CONSTRAINT VIOLATED). *** SOME ERRORS WERE REPORTED DURING THE RUN, *** PLEASE VERIFY RESULTS AS THEY MAY BE INVALID.
  11. hello Every one ,

                               i am doing optimization in topology ,i got  some error in   below how to rectify that one , and also i check mesh connectivity and  rigid link and constraint all , but i have same error will be repeated how to rectify and give me  solution .

     

    here i attached .hm file

     

     

     

    *** ERROR # 312 ***
     In static load case 1 
     the compliance is negative or large 1.07647e+008.
     Optimization/buckling analysis cannot be performed.
     due to possible rigid body mode.
     INFEASIBLE DESIGN (AT LEAST ONE CONSTRAINT VIOLATED).
      
     *** SOME ERRORS WERE REPORTED DURING THE RUN,
     *** PLEASE VERIFY RESULTS AS THEY MAY BE INVALID.
      
     

    Optimisation.hm

  12. Hello everyone , i need aware about that Optistruct moadl analysis (force loading) what type card image use it and have 5 different constraints and same load , how can i manage that type condition
  13. super work thanks a lot @Q.Nguyen-Dai can you do connectivity large circle
  14. thanks @Rahul R but symmetry ok fine , small circle connected what i do connectivity from small circle to major one
×
×
  • Create New...