Jump to content

Nithish B S

Members
  • Content Count

    55
  • Joined

  • Last visited

  • Days Won

    1

Nithish B S last won the day on July 11 2016

Nithish B S had the most liked content!

About Nithish B S

  • Rank
    Advanced User

Profile Information

  • Country
    India
  • Are you University user?
    Yes

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. thank you very much sir... i got the solution
  2. ok sir.. but i am unable to obtain failure index and strength ratios atleast.. even they are compatible with only versions since v13?
  3. i am facing the same problem.. neither i am getting the failure index values (plot is zero for all values) and SR.. i tried to input the CFAILURE in deck as you have shown above.. I am unable to get the FI and SR.. kindly help me with this error message when i import solver deck: Warning: Unsupported cards found in the I/O options section have been written as unsupported control card. Summary:Feinput finished with 0 errors and 1 warnings. 0_90.fem 0_90.h3d 0_90.html 0_90.mvw 0_90.out 0_90.res 0_90.stat 0_90_frames.html 0_90_menu.html hwsolver.mesg
  4. dear all, I did a 2D composite analysis on a member exactly following the procedure given in this link http://www.altairuniversity.com/analysis/structural/composites/modeling-and-analysis-of-composite-structure/ but the failure index values are zero in the output kindly check 0_90.fem 0_90.h3d 0_90.hm 0_90.html 0_90.mvw 0_90.out 0_90.res 0_90.stat 0_90_frames.html 0_90_menu.html hwsolver.mesg
  5. for 3D composite analysis how to check failure index? if its not possible, what is the parameter to be checked to ensure safety of design? i mean in 3D analysis of metals we check for Von-Mises stresses like wise what we have to check in 3D composite analysis? I am attaching my model with this. dragstrut.hm
  6. for 3D composite analysis how to check failure index? if its not possible, what is the parameter to be checked to ensure safety of design? i mean in 3D analysis of metals we check for Von-Mises stresses like wise what we have to check in 3D composite analysis? I am attaching my model with this dragstrut.hm
  7. thank u very much for your response sir. If its how to check for the safety of design in 3D composite analysis sir??
  8. how to check failure index in 3D composite analysis?
  9. dear all i want to generate a tetramesh for the model i have attached.. but when i enter tetramesh panel these lines are getting highlighted.. and i have removed all the free edges from my geometry.. how to troubleshoot these? side_analysis.hm
  10. @Rahul R yea i have applied load along -ve X dierction and a moment along +ve X
  11. sir i want to apply load along the axis of lug..if i apply on the midnode on either side as i have applied above.. does it make a proper simulation i am asking u?
  12. dear sir i have a geometry of lug as shown in figure.. i want to apply force and moments along the axis of lug..so i divided the load by 2..applied it on both sides as shown in below pic..whether what i have done is right way to do it? dragstrut.hm
  13. what is the dof for CBUSH elements? If i want to create a pin joint ain which i want to constraint all dof except one rotation..what dof i must select while creating zero length CBUSH element among 1-6 dof??
  14. do we have that option in hypermesh?
×
×
  • Create New...