Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by jpenche

  1. Hello, I have the same problem. I am using HW 2019 and trying to import ANSYS 2019 rst file. Thank you, Regards
  2. Hi Tinh, This is valid for profiles such us Nastran or Optistruct, but not for Abaqus. Regards
  3. According to Abaqus manual, the beam offset is given by means of "BEAM SECTION OFFSET" option, but I am not able to find it on Hypermesh. Do you know where is it? Thanks.
  4. Hi, I would say it must be: 1) Choose "Stress components IP (s)" 2) Corner data --> OFF 3) Turn on Simple average Regards
  5. According to Hyperview help, for Abaqus template it is not possible to plot results in "Material system". However, you can import the model, with the coordinate systems, together with the results and then use the "User system" option. Regards
  6. Hi, Sorry for not answering before. It was a question from a colleague and I completely forgot this thread. He finally solve the problem. It seemed it was an error in the bdf. Thank for your help. Regards
  7. Hi, I have a large MSC Nastran model and when I try to show cbush loads on Hyperview as Vectors It does not show them whereas It does as contour loads. Do you know how can fix it? Thanks. Regards.
  8. Hi George, Thank you very much. That is exactly what I needed. My doubt is solved. Regards
  9. Hi George, First of all, Thank you for your quick answer. Yes, I know that tool but my model is quite big and it takes time to export the entire model. If only I could export just the include that I have modified in long format, it would be very helpful. Regards
  10. Hi, I would like to know if it is possible to export an include file in "Nastran long format". I know I can export the entire model in long format by "Export-->Solver Deck-->template-->long format" but when I use the option "Export an include" after right click on it always is in "Standard format". Do anyone know if it is possible to do it in long format? Thank you in advance. Regards
  • Create New...