Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Onkar last won the day on May 26 2017

Onkar had the most liked content!

About Onkar

  • Rank
    Advanced User

Profile Information

  • Gender
  • Are you University user?

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello Ayushman, Can you please donwload the book from the link mentioned below named, "Practical Aspects of Structural Optimization"? Let us know if you get a doubt even after understanding concepts from the book. https://altairuniversity.com/free-ebooks-2/
  2. Could you please share the file to edu-support@india.altair.com so that we'll check and get back to you with solution?
  3. Hello Rajendra, Anyway its one of post-processing technique. The final plots can be saved in .jpg or .png formats. Further they can be used anywhere after saving in different folder.
  4. Onkar


    Hello there, Please open the geometry in Hypermesh with AcuSolve as a user profile and export that in ".nas" format.
  5. Hello, While exporting from hypermesh file (.hm), make sure that you are exporting only solids and there is no surface in that. You are getting error that it cannot detect any regions!
  6. Hi, Have you tried all the options mentioned above?? Pl send the model on edu-support@india.altair.com, I'll check whats wrong with the model.
  7. Also check whether you have selected User Profile as AcuSolve or not...!
  8. Hello, Pl have a look into the conversation. It'll help you.
  9. Try to manage the surfaces properly. Hope you are using 14.0 version onward and export in Nastran(fluent) standard format, surely this will help.
  10. Hello, It is not necessary to switch the display off while working on purge command. Will you please redirect us to the video where you've seen that...!
  11. Hello, PFA video as an answer. ABC is just given as a illustration. As soon as you tap on the new material, you can edit the properties. material_model.mp4
  12. Hello, Air, Aluminium and Water are available as a by default option.
  13. Nice Question...! For simple problems, you can keep the value of relaxation factor at its default one. As relaxation factor works on suppressing the solution (from previous iteration), surely it is going to take a lot of time. Taking the project span into consideration, you have to use it when it is really needed.
  14. Generally, value between 0.2 - 0.4 provides good balance between achieving small progression of solution and extra compute time needed to achieve the convergence.
  15. Relaxation factor is primarily a number which is used to converge the solution.
  • Create New...