Jump to content

Jake Callahan

Members
  • Content Count

    2
  • Joined

  • Last visited

About Jake Callahan

  • Rank
    Newbie

Profile Information

  • Are you University user?
    No
  1. That did the trick! I was not aware of the command.cmf file. Seems quite handy for replicating commands. Thanks for the help!
  2. I am trying to modify a group of Nastran PBAR property groups in Hypermesh via an automated tcl script. I am trying to change the beam sections of all the pbar properties groups I have stored. I have tried using a script with the line as follows (in an iterative manner): *setvalue props id=<some_pbar_prop_id> 3186={beamsects <id_of_new_beam_sect>} While there is no error output, the property card is not updated and the beam section displayed in the GUI is not correct. I am not 100% sure the entity attribute 3186 is correct for pbar beamsections: is there a file or section of the HyperWorks guide listing these id's? I have not been able to find this information. Additionally, I am unsure if the STATUS value needs to be modified in this instance. I have tried the following, also to no avail: *setvalue props id=<some_pbar_prop_id> STATUS=2 3186={beamsects <id_of_new_beam_sect>} or *setvalue props id=<some_pbar_prop_id> 3186={beamsects <id_of_new_beam_sect>} STATUS=2 my beam sections are already defined and are not being generated in the script. Any help resolving this would be greatly appreciated!
×
×
  • Create New...