Jump to content

Ildar

Members
  • Content Count

    8
  • Joined

  • Last visited

About Ildar

  • Rank
    Newbie

Profile Information

  • Are you University user?
    Yes

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. The another model with the same problem. CAD was built in Hyper Mesh sector-1gr-100mkr-hm.hm sector-1gr-100mkr-hm.x_t sector-1gr-100mkr-hm-001.acs
  2. I had use the Parasolid file format. I have the problem with Periodics meshing. Sborkasnarostom.x_t
  3. Without Periodics the meshing is fine, but I need mesh with Periodics This is the error, when meshing with Periodics:
  4. Hello, I'm working on a model the third day and can't understand what is the mistake in the meshing parametres. Once I got to build and can't anymore, don't understand what the problem is. sector-100mkr-1gr-narost-001.acs
  5. Could you correct my example and upload it here?
  6. Hello, I said about example named: "Flow Inside a Rotating Cavity" (First Image). The file that I attached, I cut a small portion of the sector (green area), in order to simplify the calculation (2nd Image). The circle has a thickness of 3 microns and it is necessary that one of its surfaces rotated at speed 1256.64 rad/sec.
  7. Hello I have the problem with the negative absolute pressure of the model material and can't understand where is my mistake. My model is like the "cavity rotating" from examples of Acusolve help, but with inflow and outflow. I have the Mass Flux and Pressure in the inlet. When I use the constant model of the material it work, but I need to use the ideal model of air. zazor-1k1-hm.acs
  8. Hello I have the problem with the negative absolute pressure of the model material and can't understand where is my mistake. My model is like the "cavity rotating" from examples of Acusolve help, but with inflow and outflow. I have the Mass Flux and Pressure in the inlet. When I use the constant model of the material it work, but I need to use the ideal model of air. zazor-1k1-hm.acs
×
×
  • Create New...