Jump to content

Simulation@Work

Members
  • Content Count

    8
  • Joined

  • Last visited

About Simulation@Work

  • Rank
    Newbie

Profile Information

  • Are you University user?
    Yes

Recent Profile Visitors

654 profile views
  1. I have meshed a geometry using voxel mesh with element size 0.5mm. I have seperated the mesh for design and non design space for topo optimisation. But now I feel the element size is too small and want to only change the element size to say for example 5mm (voxel mesh). How can I do it. I don't want to redo the whole model again.?( Like seperated the design and non design space ). Please guide me.
  2. Hi, I did the way u had said for double dependency, As of now i dont see that double dependency error coming up.Hopefully its fixed.... But now,Again i am getting errors *** WARNING # 5628 The compliance is negative or large 6.79829e+008. The rotational displacement has large magnitude, -993.607 degrees (larger than 180). The rotational degree of freedom may not be constrained properly in the model. subcase id = 1 grid id = 3745606 component = 4 *** ERROR # 312 *** In static load case 1 the compliance is negative or large 6.79829e+008. Optimization/buckling analysis cannot be performed. due to possible rigid body mode. *** WARNING # 5628 The compliance is negative or large 9.44687e+008. The rotational displacement has large magnitude, -1404.25 degrees (larger than 180). The rotational degree of freedom may not be constrained properly in the model. subcase id = 2 grid id = 3745606 component = 4 *** ERROR # 312 *** In static load case 2 the compliance is negative or large 9.44687e+008. Optimization/buckling analysis cannot be performed. due to possible rigid body mode. *** WARNING # 5628 The compliance is negative or large 8.07365e+008. The rotational displacement has large magnitude, -1180.6 degrees (larger than 180). The rotational degree of freedom may not be constrained properly in the model. subcase id = 3 grid id = 3745606 component = 4 *** ERROR # 312 *** In static load case 3 the compliance is negative or large 8.07365e+008. Optimization/buckling analysis cannot be performed. due to possible rigid body mode. (Running out-of-core solution) I again tried to do equivalence of nodes by using SHIFT+F3 ,with tolerance 0.01. But zero nodes are found to be equivalenced. And error #312 exits I attach my .out file .Please see it attched. Also I did a linear Static analyis to check how the part is behaving.I am attaching the animation of it .please find attaached Final4.out Error_Karthik.mvw
  3. HI I was Just working on it. What I understand by your answer is that there are 2 Closely lying RBEs ,which have a common dependent node. Is this correct? ..Ok so what i understnad is that I have to deselect that common node(free it from RBEs) You said that I have to go Rigids panel>> Update>> Connectivity>> select RBE and deselect the common dependent node. I got stuck after selecting RBE(See the image attached) I have 2 qustions 1. Once I go Rigids panel>> Update>> Connectivity>> click on any 1 RBE, after this how to find the common dependent node that must be deselectd and updated. 2. Also how to find those RBEs which are in this typical conndition (I mean sharing of dependent nodes) Thanks and sorry to bother you again....
  4. Thanks. I will work on it. And get back to u,if I could not solve it. I am really confused with this .....
  5. Hi Did u recieve my model which I sent you through file transfer.... I was not sure whether it got uploaded or not. Thank you so much.
  6. Thankyou for your kind response.I solved the error as your guidance. But now i am getting another error like *** ERROR # 173 *** A dependent d.o.f. defined more than once in rigid element entry. GRID ID = 9211396 component = 1 I googled through into this same forum . I got the solution,But i am not understanding what to do . How to Solve thiserror ? You had written like" please use the command "Tools-> check elems->1-D" rigid loops and depenency (including independent nodes)." .I am not understNDING what to do .... I did the same like what u said. The result for check elements 1D says as shown in attcahed image .PLease help
  7. Hi I have model for topology optimization. It shows the following error *** ERROR # 312 *** In static load case 1 the compliance is negative or large 6.79833e+008. Optimization/buckling analysis cannot be performed. due to possible rigid body mode. FEASIBLE DESIGN (ALL CONSTRAINTS SATISFIED). I realized that it may be due to no proper node to node connectiviyt.I even checked for preview equivalence. There was no disconnectivity. I dont understand whats the error .Please help .I have uploaded the file .Please help me to solve
×
×
  • Create New...