Jump to content

Timur Soganci

Members
  • Content Count

    4
  • Joined

  • Last visited

About Timur Soganci

  • Rank
    Newbie

Profile Information

  • Country
    Turkey
  • Are you University user?
    No

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I've been working on adhesives currently. I try to make a correlation between the forces acting as peeling stress and the failure load. since the adhesively bonded surfaces rotates in the current example, I could not obtain the forces perpendicular to the surfaces. these forces cause peeling stress and to find the correlation and/or contribution of these forces to failure, I need to have been calculated the components of these forces.
  2. Hello again. I use the transient animation mode but the problem still persists.
  3. Hello, Since the contact surface is deformed in the current analyses, I would like to use tracking system to obtain the projection of the contact forces on the element surfaces. I could manage to use tracking system for displacement but I could not find a way to use for vectors of contact forces. the toggle A picture of the issue I mentioned, is attached to this message. The swicthed that is written "use tracking system" cannot be activated as shown in the second picture, Thank you for your help in advance.
  4. Hello, I'm trying to create a flexible body file by using Craig-Bampton Method. I need to write nodal stress values into the .h3d result file. From the global output request menu, I choose the stress option with corner location, then an ordinary analysis that has standard loadstep (for example linear static case) is run, and i can obtain the corner values. whereas, for the flexibody generation case, the nodal stress values are not written in the h3d file. Is there any way to obtain corner stress values in a .h3d result file for a flexible body generation?
×
×
  • Create New...