Jump to content

Pooja S

Moderators
  • Content Count

    84
  • Joined

  • Last visited

  • Days Won

    1

Reputation Activity

  1. Adarsh Kumar liked a post in a topic by Pooja S in While assigning vector along nodes N¹,N²,N³ status bar is showing an error of "Input projection vector has '0' length".   
    Hi Adarsh Kumar
    Error is due to  N1, N2,N3 are co-linear ,
    N1N2N3 all  together represent the plane 
    N1and N2  represnt the direction 
  2. Shivani Tiwari liked a post in a topic by Pooja S in FAQ 5: How to get Min/Max result for a static/Dynamic subcase?   
    Hi shivani Tiwari
    This example might help you 
    Hyperworks help > Hypergrapgh> HG-1000: Plotting XY Data
  3. Crashphys liked a post in a topic by Pooja S in Incompatible Part,Mat and Prop, More Than One Element Type in Comp   
    Hi
    0000.out is the file which gives the summary of the FE model created (property, materials, parts, contacts, time step...) and summary of load cases in the form of warnings and/or error messages , 
     please do attach the 0001.rad file to check about the run time , do cross verify the unit system consistency before  carry out the run  
  4. Salaya liked a post in a topic by Pooja S in No Displacement and Less Stress Result after Simulation.   
    Hi Salaya
    Type 2 interface is used to represent the  tie contact, refer the attached document  to know more about the type 2 contact 
    INTER_TYPE2.pdf
  5. mechemre liked a post in a topic by Pooja S in Modeling of core-shell system   
    Hi
    Please find the attached file 
     
    Tetra_1.mp4
  6. Julio liked a post in a topic by Pooja S in FAQ3. How to remove fixed points from the surface?   
    Hi Julio
    Its a point  you can delete by 
    click > F2> Points> Select by any option > delete
     
  7. nishendra liked a post in a topic by Pooja S in Modeling of core-shell system   
    Hi
    Please find the attached file 
     
    Tetra_1.mp4
  8. mechemre liked a post in a topic by Pooja S in Modeling of core-shell system   
    Hi
    Extract the faces of shell named component mesh by click on > Tool > faces ,Take only the inner surface of face by deleting or masking the other elements and create the TET mesh by these shell elements for core 
    Find the attached the video clip 

  9. mechemre liked a post in a topic by Pooja S in How to assign solidmap mesh with a geometry   
    Hi
    You can  move your elements from solidmap component  to geometry component by 
    Clicking on > Shift + F11
  10. Crashphys liked a post in a topic by Pooja S in Incompatible Part,Mat and Prop, More Than One Element Type in Comp   
    Hi
    Please attach the .0000.out file and correct input file ,The attached model doesn't have SPH elements
    there are few free edges in the model do correct it 

     
    Regarding error 668 and 53 go through these post
  11. QuentinB liked a post in a topic by Pooja S in What's the best way to connect Parallel mid-surfaces ?   
    Hi
    Please go though the page no 179-181 form ebook , the link for the same is given below
    https://altairuniversity.com/free-ebooks-2/free-ebook-practical-aspects-of-finite-element-simulation-a-study-guide/
  12. rabi liked a post in a topic by Pooja S in difining material proproties   
    Hi Rabi
    when you want to convert from one solver to another recommended method is click on 
    Tools > convert >  Ansys > To Optistruct
  13. Shivani Tiwari liked a post in a topic by Pooja S in FAQ 5: How to get Min/Max result for a static/Dynamic subcase?   
    Hi Shivani Tiwari 
        You can use Hypergraph tool to plot the Dynamic Min/Max Result value versus Frequency
  14. Sukwasa liked a post in a topic by Pooja S in Why the result show "Failed to attached result" in RADIOSS   
    Hi
    Download  the ebook from the below location and  try  the tutorial mentioned in the book or from Altair hyper works help for better understanding 
    https://altairuniversity.com/free-ebooks-2/free-ebook-crash-analysis-with-radioss-a-study-guide/
  15. Simon Križnik liked a post in a topic by Pooja S in Engine run not starting   
    Hi
    In engine file /INTER is empty 
     

  16. Rahul R liked a post in a topic by Pooja S in Displacement not changing in hyperview for different frames   
    Hi moeen
    click > legend > edit legend >type >dynamic scale
     
     

  17. Yashh Gaikwad liked a post in a topic by Pooja S in Drop Test On Impact Atteunator   
    Hi Yashh Gaikwad
    The below link might help you:
    https://altairuniversity.com/learning-library/1-impact-analysis-set-up-for-radioss-in-20mins/
  18. Simon Križnik liked a post in a topic by Pooja S in Drop Test On Impact Atteunator   
    Hi Yashh Gaikwad
    The below link might help you:
    https://altairuniversity.com/learning-library/1-impact-analysis-set-up-for-radioss-in-20mins/
×
×
  • Create New...