Jump to content

RAVITEJA_028

Members
  • Content Count

    19
  • Joined

  • Last visited

About RAVITEJA_028

  • Rank
    Beginner

Profile Information

  • Gender
    Male
  • Country
    India
  • Interests
    machine design
  • Are you University user?
    Yes

Recent Profile Visitors

103 profile views
  1. I AM TRYING TO BUILD A 3D MODEL FOR THE INDUCTION HEATING SETUP USING MODELLER. WHEN I AM TRYING TO SEE ANY DEFECTS ARE THERE A WARING IS POPPING UP AS FOLLOWS. IS THERE A SIMPLER WAY TO APPROACH THIS GEOMETRY AS I AM USING STUDENT EDITION I CANNOT IMPORT ANY .dxf FILES
  2. thank you Abdessamed. i have applied the line discretization. for thermal analysis how do we apply the skin effect mesh, or is it not required if we are using coupled analysis of thermal with magnetic or electric application. Thank you
  3. Hello, I am working on induction heating cookers. I need to model the coil using litz. so is there a example or documentation that i can use to make the coil. I am attaching the coil type that i have to model. thank you
  4. Hello, i am using a student edition of flux software for my masters project. following an example in induction heating in 2D the number of nodes is exceeding the limits. how can i limit the elements to observe the post-processing. thank you
  5. i have seen the results with isoline, but how to create it with sensor. do i need to input the formula.
  6. Hello, i am doing short circuit analysis for my machine and i want to know the magnetic field Hm.(A/m) . for this should i make a sensor or is there a direct way to see how the magnet values are changing. so that i can decide on my magnet parameters. thank you
  7. While assigning rotor kinematics there is shown velocity as parameter but the units described are in rpm. so i used my speed in the velocity column but the angular speed i am getting is totally different. please help me in this. thank you
  8. ok. if i want to set copper conductors in 2D what steps should i follow. thanks a lot for your help
  9. when we are using stranded coils in 2d models, i f we are not assiginnig any material to it. what will be the default material. thank you
  10. thank you for the help. have a good day abdessamed.
  11. THANK YOU Abdessamed. I WILL TRY YOUR SUGGESTION
  12. HELLO ABDESSAMED, SHOULD WE USE COMMANDS OR API FOR THE CO-SIMULATION PROCESS OR DIRECTLY CAN WE COUPLE BOTH OF THEM
  13. hello there, i am a beginner in fea. i am using the flux student edition for my masters project. the query i have is we do back emf estimation as a different simulation and do other analysis using current sources. i am using sinusoidal voltage sources to see the response of my pmsm motor. but i dont see any oposition to the applied voltage (the current passing through the phases is only voltage applied divided by equivalent impedance). to this i am getting nearly 200 times my rated current. i am doing the simulation in transient magnetic analysis. what should i do. should i do other kind of analysis or provide a back emf look up table externally. please provide any suggestion. thank you.
×
×
  • Create New...