Jump to content

Roberto_

Members
  • Content Count

    16
  • Joined

  • Last visited

Everything posted by Roberto_

  1. Hello, where can I find this full video explaining the methods of DOE? MELS DOE in Hyperstudy 2017: https://altairuniversity.com/learning-library/mels-doe-in-hyperstudy-2017-2/ Thank you in advance.
  2. This is the error messages that I got in Hyperstudy software:
  3. Do you have more information about what is this "System error #12" about?
  4. Hello Diana, Thank you for the message. I do have this option "Ignore failed evaluations" enabled. And still I got the error message. (I think is because the error mesage comes from FluxMotor and not from Hyperstudy). I am using Hyperstudy 2019.1 and FluxMotor 2019.1 professional version. (not student) I also run the simulations with 1 multi execution. 32GB RAM and E5-1650@3,60GHz processor (and all the other softwares off to try to dont get error messages. Hope you can help me with this. Regards,
  5. Hello!, I am doing some simulation in Hyperstudy from a FluxMotor Geometry and sometimes this error message appears (Execution fail), and stops the simulation. So I have to click "OK" and the the execution starts again. I want to keep the PC simulating hypersutdy the whole night or a couple of hours without any stop of the silumation. How can I disable this option / Text message? Thank you in advance
  6. Hello, thank you for the answer. But I am not getting the icon button with FLUX SKEW in my screen of Flux Motor. Should I have to do something special to get it? (the version is FluxMotor 2019.1 that I just installed) Best regards.
  7. Hello, I would like to know how can I export a model from FluxMotor to Flux Skew. I saw it in the "03-Flux12.2_FluxMotor_NewFeatures-Altair-PL-SG-FM" file and I want to know if it is now available. I download the FluxMotor 2019.1 version and the icon not appear. Please let me know when will be available. Thank you in advance.
  8. Hello Abdessamed and thank you for the reply. I just wanted to know if there is a way to export also the winding (made by CreateNonMeshedCoilForRadialMotor.PFM) I have heard that if it is composed by non mesh coils unfortunatelly it is not possible to export it because it's not really a geometric entity. I just want to make sure that probably there is a way to export it. Also, if I can get the lines of the winding and export it in a CAD file , it will work for me. (I just will extrude the shape, but at least I have the route). Or if you have any other idea, I will appreciate to help me to export the winding. Thank you in advance Best Regards
  9. Hello, I want to know if there is a way to export ageometry made in Altair Flux to any CAD files format(.IGES, .CATIA, .STEP, etc) The only file that I can export is a DXF file. Also I want to export the motor geometry with the winding. I made the IPM_Motor_Flux_3D.pdf tutorial and now I want to export the geometry in a CAD file . Thank you in advance. Best Regards.
  10. Hello, I am doing the IPM_Motor_Flux_3D.pdf tutorial from Flux 2019.1, and when I reach page 12 of the "3D Overlay to create the geometry" (after I enter all the values to Create Non Meshed Coil and press OK) I got the following error message: Error message: Failed convert object : class cast error. Desktop updating step failed. I can not skip it because the winding parameters are very important to the study that I am doing. Hope you can help me with this. Thank you in advance Best regards.
  11. Thank you very much Iombard and Abdessamed for your kind response and the file.
  12. Thank you very much Abdessamed for your kind response.
  13. Hello, I would like to know if there is any tutorial in Flux where It explain how can I transfer a 2D geometry (of a IPM Motor) that I have design in Flux to 3D module to carry out studies and simulate it. Thank you in advance, Best regards.
  14. Hello, I am doing the "SPM_Motor_Flux_3D.pdf" tutorial, and in page 15 there is a file named "Create_NonMesh_Coils_SPM.py" that I have to Run. I can not find it in my PC. Could you please tell me the exact directory where I can get it?, or much better, if you could send it to me I would appreciate it. (and let me know if I need another file to finish the tutorial) Thank you in advance.
  15. Hello, I am trying to export a Flux geometry (of a rotor or a stator) to FluxMotor by following the "CreateFluxMotorInnerMagnet.pdf" file step by step, but placing parameters and references to the dimensions. When I get the Excel file (in FluxMotor Part Library), none of the parameters are shown referenced, simply the points are placed with coordinates in numbers. Basically, what I am looking for is to design a geometry in Flux and to be able to export it to FluxMotor, and being able to modify its dimensions like the ones that have predefined Fluxmotor. (e.g: be able to modify dimentions of W1, H, WM, TM, etc in FluxMotor with my geomettry exported from Flux) Thank you very much in advance
×
×
  • Create New...