I solved my last problem and I am now able to import the CFD-Tetramesh from Hyperworks in AcuSolve. Doing so I encountered a new problem, which I can not currently solve. The CFD-Mesh that I have created uses hexa-Prisms and the core consists of tetra-elements. In HyperMesh the 3D elements both from the Prism Layers and from the core are asigned to one component. When imported in AcuSolve the prism layers and the tetra-core are automatically distributed to separate components. Having explained this - the division of the 3D elements is actually not the real problem. The problem is that when the 3D-CFD Mesh is created the Inlet and Outlate Face are imprinted with the Prism layer from the core. So basically the Inlet and Outlet faces also have tetra and hexa 2D elements. To make a better representation of this, I've uploaded a screenshot of the interface. Now the problem is that when the whole solver deck is imported in AcuSolve the cells from the inlet and outlet also get separated into different components.
In AcuSolve I tried to use the ''Add to'' options to manually add the elements from the prism layer to the same component as the tetra elements, so that I would have all the 3D elements in one component. The same in order to have one Inlet and one Outlet. But when I start the Run. AcuSolve still does not accept the mixed topolgy elements.
Has anyone had similar problems and how did you solve them?