Search the Community
Showing results for tags 'hypermesh 2017'.
Found 3 results
Hi, I am running Hyperworks 2017 and have run into an unusual issue. When I state a beam section greater than 32mm diameter, I run into issues when re-importing. Please find attached a screenshot of the issue. On the left is the hypermesh session used to make the file and the right is the hypermesh session importing the .fem. You can see on the left that the beam section 2000003 is specified with radius of 25mm... however on the right, a warning has appeared stating that PBAR dimensions are different from the section (which is odd as the PBAR section properties come from the beam section). Section 2000003 is missing on the left hand import session and replaced with 2000004 with a name matching the property name. Also the section is no longer ROD, now it is a Generic section. After some investigation I found this error occurs with sections greater than 32mm diameter in the beam section. My previous installation did not have this issue so I can only put this down to an issue with the new version. Please help!!! Kindest regards Andy
hai, I am doing a tutorial taken from the Altair site which is a bird strike on aircraft wing. while i am doing i had a doubt regarding the boundary condition application. i don't know how to apply boundary condition in radioss. please help
Dear George Sir, Thank you for the crash analysis part to do. I have tried this 3 wheeler motorbike crash box analysis. after the run when i did post process the box pass through the wall instead of hitting. i don't know what is the reason. I am attaching the file. please check and let me know the correction. Best regards, Dani crash_box_meshed.h3d crash_box_meshed_0000.rad