Search the Community
Showing results for tags 'process'.
Found 2 results
Dear All, Suppose i have a cube of 1 cm edge length and want to impose heat treatment cycle as a loading condition. can we predict the change in elastic modulus and hardness of the material after heat treatment? Regards, Ganesh Munge
KTex LayUp is dedicated to representing one of the composite materials manufacturing processes: the molding or RTM process. Its main objective is to automatically set-up a ready-to-run finite element model simulating this process. To do so, two input parameters are needed: the fabric and the mold. Some molds and fabrics are included in the tool database, but bespoke ones can also be created. A video regarding mold creation will come later. When selecting a fabric, two options are available: REV or Size/Shape. The REV option only needs the Representative Elementary Volume of the fabric. This REV is then duplicated and translated as many times as needed to be bigger than the mold. But the final geometry of the fabric to be molded will always be a square. The Size/Shape option needs the geometry of the fabric to be molded. This fabric can be a stack of several plies. It can feature several plies of different geometries, thicknesses or patterns... Anything is possible in order to represent the real plies that are to be molded. The user is free to define the fabric, but the user has to be careful as mistakes will not be detected. The attached video gives an example of the difference between the two options. KTexLayUp_REVvsSHAPE.mp4