Jump to content

Search the Community

Showing results for tags 'surface'.

More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • Altair Support Forum
    • Welcome to Altair Support Forum
    • Installation , Licensing and Altair One
    • Modeling & Visualisation
    • Solvers & Optimization
    • Multi Body Simulation
    • Conceptual design and Industrial design
    • Model-Based Development
    • Manufacturing Simulation
    • CAE Process Automation
  • Academic Partner Alliance Forum
    • APA - Composites
    • APA - CFD & Thermal
    • APA - Vehicle Dynamics
    • APA - Manufacturing
    • APA - Crash and Safety
    • APA - Noise, Vibration and Harshness
    • APA - System Level Design
    • APA - Structural and Fatigue
    • APA - Marine
    • APA - Optical Design
  • Japanユーザーフォーラム
    • ユーザーフォーラムへようこそ
    • Altair製品の意外な活用例
    • インストール / ライセンス / Altair One / その他
    • モデリング(プリプロセッシング)
    • シミュレーション技術(ソルバー)
    • データ可視化(ポストプロセッシング)
    • モデルベース開発
    • コンセプト設計と工業デザイン
    • 製造シミュレーション
    • CAE プロセスの自動化
    • エンタープライズソリューション
    • データアナリティクス
    • 学生向け無償版(Altair Student Edition)


There are no results to display.

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start





Website URL







Found 22 results

  1. プルダウンメニューView > Command Windowにチェックを入れ、表示されたウィンドウに 下記をコピー/ペーストすることで、1行目の”面積”で入力した値以下のサーフェイスを選択し 2行目で選択したサーフェイスを削除します。 hm_createmark surfs 1 "by id" [hm_getsurfacesbyarea 面積] *deletemark surf 1 detect_the_surface.mp4
  2. Hello, I am facing a problem while creating a 2D surface mesh in TCL Code in hypermesh. The settings done in "*interactiveremeshsurf" and "set_meshfaceparams" seem to be ignored for all surfaces and overwritten by the settings written the GUI at 2D-->Automesh-->Edge deviation. The code can be seen below: *setedgedensitylinkwithaspectratio -1 *elementorder 2 *startnotehistorystate {Automesh surfaces} *createmark surfaces 1 [lindex $List_OP($i) 0] for { set ii 1} {$ii <=[llength $List_OP($i)-1]} { incr ii} { *appendmark surfaces 1 [lindex $List_OP($i) $ii] } if { 1<=$i && $i<=3 } { # markmask, elementsize, elem_type (0 trias, 3 rtrias) *interactiveremeshsurf 1 0.25 3 3 2 1 0 set i_am 0 foreach Element $List_OP($i) { # index (von 0), elem_type, alg_type, elem_size *set_meshfaceparams $i_am 2 3 3 0 1 0.5 1 0 *automesh $i_am 1 3 incr i_am } *storemeshtodatabase 1 *ameshclearsurface *clearmark surfs 1; *endnotehistorystate {Automesh surfaces} Am I missing some command? Thanks and best regards, Henrik
  3. Hello everybody, my name is Thomas from Germany and I am working on my Bachelor Thesis, which is about the topic CFD, at the moment. I am at the beginning of my Thesis and at first i want to create a simple model validation. My topic is about an easy Venturipipe, which gets passes through water. So there are only two variables, which are important: The pressure and the velocity, which i estimate with an analytical calculation, too. The Venturipipe has got a rejuvenation. And if you think about the Bernoulli´s equation, the velocity gets higher and the pressure goes down near the rejuvenation. When the fluid leaves the rejuvenation, the values supposed to be retransform back to the input values. And the model gets unrealistic at this point: When the fluid leaves the rejuvenation, is does not get slower. I create the model data with HyperMesh 13.0. Unfortunately i am not able to find any mistake in the input file, which is computed with AcuSolve. I hope that someone will hear my problem and is able to solve it. Probably there is only a little mistake, which destroys the complete model in the end. Thank you for your support in advance! Best regards, Thomas PS: There is a zip.file enclosed, which includes all the important data and some results, too. Venturi_Pipe_Problem.zip
  4. Is it possible to plot a 3D surface using tabular data? Currently, all I see is a method to use tabular x,y data and a z expression.
  5. Hello everyone, I think this is a basic question, but I am unable to get it working. I am using Hyperworks 14. I have a block of solid hexagonal mesh and I am trying to add new components by selecting a subset of the elements. I am trying to work with the 'organize' panel option, but I had no success so far. To test it, I created a huge cube filled with hexahedral elements and a small rectangular surface within the cube. I was able to associate few of the nodes by doing 'Geometry ----- node edit ----- associate' and selecting the rectangular surface and small tolerance level. It shows that I have some of the nodes associated to the surface component. Now to select a subset of elements within the cube, I did 'tool ---- organize ----- collector ----- elements ------- by geometry ------ by surface.' It doesnt show any elements associated to this surface even though I have a few nodes associated to it. Could you please help me figure this issue? I checked other questions in the forum, but they dont help because I have a complex geometry to select elements for. Here is a small screenshot of what I am doing. I am following the directions from the help documentation below ('by geoms'): Thank you for all your attention, Bharath
  6. Hi all, I have a CAD file as shown in the image below. It is symmetrical about z-axis. I need to trim the CAD into half and delete surfaces in other half. Can anyone suggest the logic to select the surfaces in any half, i already have the code to split in half.
  7. I'd like to create some surfaces with lines using the *splinesurface. When I execute the scripts, it says "unable to trim the plane by input lines". The scripts: *collectorcreateonly components "comp1" "" 4 *createmarkpanel lines 1 "Select lines to create the comp1 component:" *createplane 1 1 0 0 0 0 0 *surfacesplineonlinesloop 1 1 0 0 *collectorcreateonly components "comp2" "" 5 *createmarkpanel lines 1 "Select lines to create the comp2 component:" *createplane 1 1 0 0 0 0 0 *surfacesplineonlinesloop 1 1 0 0 *collectorcreateonly components "comp3" "" 6 *createmarkpanel lines 1 "Select lines to create the comp3 component:" *createplane 1 1 0 0 0 0 0 *surfacesplineonlinesloop 1 1 0 0 ... But when I execute the one which is wrong alone, it's all right. thanks
  8. Hi there, I am working on a cylindrical packaging(its a circular strip) and I need to get the cutting guide for it. Is there anyway in evolve to get the actual flat projection of a curved surface(real size) so I can use the outline of it to get my cutting guide thanx Pil
  9. Hi, I've been provided with a hm model and need to carry out some geometry changes. However, the component I have been given is 3D tetrameshed without any surfaces. Is there anyway I can generate a surface from the provided tetra? I've tried using the surface from FE function but as I only have a 3D this wouldn't work. Thanks in advance, Tom
  10. ワイヤーフレーム表示や半透明表示のサーフェスが選択しにくい場合、 マウスの左ボタンを押しながらカーソルを移動させ、サーフェスエッジ付近に カーソルを移動させると、添付動画のように選択されるサーフェスがハイライトされ ます。 Surface.mp4
  11. Hi, I have multiple solid components. For my Analysis, I'd like to connect some of the components in certain Areas, but not everywhere where the components "touch". In order to do that, I equivalenced some of the nodes of the two components, which works absolutely fine for my model. But: I would still like to have some of the solids' surfaces not to be connected with equivalenced nodes, but at the same time the surfaces (that are next to each other and in undefined contact) should not be able to penetrate each other during the nodal displacement of a static analysis. How can I create the option that a surface is defined as "not penetratable"? I tried different things, for example creating contact surfaces on each component. But that does not work as I thought it would. Could anyone help me, please? I would be happy to receive any kind of hint or short explanation. Thank you! Regards Hampel
  12. Hello, Thank you in advance for reading this and for your help. I am currently working on a project where I create a geometry and eventually mesh this geometry in HyperMesh. The key here is, that I use Matlab to generate my TCL/HM code (since the working force here is more aquainted with Matlab than with the TCL code. This code uses certain input parameters and generate information that can be translated to HyperMesh. Now I am at the point where the whole geometry creation using HM/TCL goes perfectly fine, even after some setbacks where I had to cleverly write the program due to the lack of control on the node, line and surface numbering. I'm stuck at the point where I create holes in my geometry, where certain other parts can connect to. The geometry consists of several suppressed edges. These edges do not influence the shape of the geometry, like edges that will change the angle of the geometry will; these suppressed edges just lie in the same plane but are used to create the geometry. The surfaces are all numbered in the sequence of generation, so the first generated surface has ID 1, second has ID 2, etc. I create holes by creating a node at the location where the hole centre should be, create a circle with a given radius around it, trim the existing surface with the line and eventually deleting this circular surface, creating a hole. Note again, this is all done by programming, not by using the GUI. Whenever these circles, hence the trimming, do not intersect with a suppressed edge, everything goes fine. It creates a nice hole in my surface, which has that certain ID. Whenever said circle intersects with a suppressed edge, things go wrong. Say there is a piece of the circle that crosses that suppressed edge. What I would want, is that the surface created by trimming would simply get the newest maximum surface ID. What happens instead, is that the surface gets the ID of the one it is partly intersecting. You must understand, that from a programming point of view, this gives me no control whatsoever of the surface IDs that come after, hence my program fails there. Now, I have thought of ideas on how to counter this problem. For example, I could create a component for every generated surface, and assign it a name, giving me control of the names and not having to look at the IDs of the surfaces anymore. This is not such elegant solution. Instead, I'd like to use different means to solve the problem, for example, by using the ID of the last created surface, rather than the max surface ID. My question to you is, what would you do to solve this problem? Would you go for the component solution? Are there query commands that I haven't looked at? Are there macros to solve this problem? Any help is appreciated. I've added some screenshots that hopefully clarify my situation. Thank you for any help that is supplied! Jeffrey This will yield no problems, there is no intersection: This will yield problems, as there is an intersection: Note that in both cases, these edges are suppressed!
  13. Hello. Maybe a trivial question here, but when a 2D mesh is created on a surface and for some reason a translation of both the surface and the mesh is performed, the association between them is lost (naturally) and then the process of selecting elements or nodes on that particular surface becomes laborious. As far as I know, one can go to Geometry-->Node edit and then select "Associate" to fix this, but only one surface, one line etc. can be selected, making the process hard, or impossible when large meshes have to be processed. Any ideas on how to perform the association faster? Thank you.
  14. Hi All I have a bearing which has some small surface fillets on its edges. could someone tell what to do if hypermesh fails in surface fillet removing? Bearing.STEP
  15. Hi All Sometimes I see nodes on the edge of a pipe, made of surface, that are not connected to any edge, but they create problem if you need to create a surface between the pipe and another one ,and make that surface distorted. also it can't be deleted using point edit > suppress
  16. Hello, I would like to export / output the surface pressures from a VWT CFD to a text file to be utilised in HyperMesh for a topology optimisation using Optistruct. I believe I will need to use AcuSolve's AcuConsole to this. From within AcuConsole I am to use AcuOut. I am having trouble doing so. Can someone offer some guidance. Thank you in advance.
  17. I am creating a model using thin shell surfaces for a ship-type structure where the side slopes outwards from the bottom. I would like to be able to cut the side stiffeners on a plane normal to the sloping side, not parallel to the global axes. I have created an axis system with the Z axis normal to the side, but use of this system seems to be very inconsistent in Hypermesh v13. I can create a surface by extruding a line in the local Z direction, but I can't create a line by extruding a node. I can't create nodes using coordinates along the local system. I can't break a surface on any plane except one of the global planes. I have done what I want by creating a vector then a line then a surface and breaking self-intersecting surfaces, but it is very long-winded. It would be so much easier if I could break the surface using local planes at a given base node! Any chance of Hypermesh adding a local system option to the edit - surface - plane form?
  18. Hi all I have a Solid ( the exhaust manifold) cylinder, where it seems like to be only shells but when I go to features like delete feature, it can be chosen as Solid. the adjacent pipes connected to this cylinder are already surfaces so I could extract the midsurface. how can I convert this middle solid cylinder to surface?
  19. Hello, Currently I'm trying to optimize a composite laminate in optistruct. I have meshed the surface I use as shape. When I try to apply a pressure force on this surface the pressure is applied on both sides of the surface. This results in an displacement of 0 mm, ofcourse.... so: How can I apply a pressure force on a single side of a surface in Normal Direction?
  20. Hi, I want to get any coordinate (x,y,z) that lies on the surface. Only condition is that it should not be on the surface edges (Please refer the image attached). Is there any API available to achieve this? Thanks, Roshan
  21. While editing solid component in an geometry cleaned assembly, the components associated with that solid (other solid in contact and extended surfaces) gets automatically converted to solid. Associated other components get merged into single component with the edited solid. Please help!!! NOTE: If association with other components is broken (by trimming solids into parts) than no such problem arises. Any other method without trimming solid. Why does this happen???
  • Create New...