Search the Community
Showing results for tags 'ti'.
Found 3 results
I’m currently exploring Embedded and I’ve got a C2000 Piccolo LaunchPad from TI and I was trying to run a simple BLINK code. However, when I tried to compile, I got these two errors below. I’m installed CSS version 6.2 and my embedded is the 2017 version How do I solve this issue?
Hi, I'm trying to communicate between two C2000 piccolo boards through i2C protocol. Though the sending end seems working I can't confirm the operation on receiving end. Here what I did was the sending operation run in debug mode while receiving program loaded to other board through flash programming. If anyone can assist me how to figure the correct operation would an immense support. I'm attaching two of my diagrams I used to program the devices. Thanks. i2Crecieve.vsm i2Cwrite.vsm i2Cwrite-d.vsm
Submitted by davewilson on Fri, 12/07/2012 - 01:58 Brushless Interior Permanent Magnet (IPM) Motors provide a high efficiency by using torque provided by the magnetic fields of a permanent magnet and the reluctance torque of the surrounding soft iron structure in which the magnets are embedded. The produces an interesting torque curve that combines the magnetic pole direction sensitive torque with the pole direction insensitive reluctance torque. This has the effect of skewing the peak torque curve based on phase current. The attached diagram below (you must be signed in to see and download it) shows the effects of varying the Iq phase current on the reactance/total torque ratio in a Prius IPM motor. We are currently using this diagram in our Texas Instruments Motor Control Seminar series. 04 Prius IPM Motor Current Ratio.zip