Search the Community
Showing results for tags 'type 2'.
Found 4 results
Hi I've been trying to set up the drop test tower simulation comprising of 8 components. All of the components are SOLID, I have faced with the difficulty to connect those components appropriately then, I decided to use the interface type 2 as the connectors. As a result, during running RADIOSS, it showed up the 10 warnings as below. 1. How to set this kind of interface with the suitable connection (Which parameter ?), just connect them instead of being the equivalent node. 2. I defined the BC as Solid symmetry and based fix, both of them cause the incompatible kinematic condition, how to solve? WARNING ID: 194 ** WARNING IN HIERARCHY REFERENCE DESCRIPTION : -- NODE GROUP ID: 12 -- BC_Gravity TITLE: PART REFERENCE TO UNEXISTING ID=80 .. BOUNDARY CONDITIONS .. INITIAL VELOCITIES .. DOMAIN DECOMPOSITION .. ELEMENT GROUPS .. INTERFACES .. INTERFACE BUFFER INITIALIZATION WARNING ID : 1079 ** WARNING : CHECK TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE .. RIGID BODIES .. RETURNS TO DOMAIN DECOMPOSITION FOR OPTIMIZATION .. DOMAIN DECOMPOSITION .. ELEMENT GROUPS .. INTERFACES .. INTERFACE BUFFER INITIALIZATION WARNING ID : 1079 ** WARNING : CHECK TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE WARNING ID : 1157 ** WARNING : TIED INTERFACE .. RIGID BODIES .. ELEMENT BUFFER INITIALIZATION WARNING ID : 312 ** INCOMPATIBLE KINEMATIC CONDITIONS IN MODEL DESCRIPTION : 44 INCOMPATIBLE KINEMATIC CONDITIONS IN MODEL .. GEOMETRY PLOT FILE .. PARALLEL RESTART FILES GENERATION TERMINATION WITH WARNING ------------------ 0 ERROR(S) 11 WARNING(S) PLEASE CHECK LISTING FILE FOR FURTHER DETAILS
Hi together, i try to visualize the contact forces (normal and tangential) of a type 2 interface in radioss. Is there a engine keyword to visualize the contact force as Animation, so that one can see it in hyperview ? I use Interface type 2 with spotflag 20. This means, that a contact force is calculated in order to compare the result to the rupture criterium. I would like to visualize this contact force. Thanks in advance! Greetings, Sebastian
Hi, I am trying to run a model with tied interface (Type 2) and AMS. The interface is defined with contact surface as master and nodes on the slave side. During starter the following warning appears: WARNING ID : 852 ** WARNING SLAVE NODE OF AN INTERFACE TYPE2 & AMS and during computation: WARNING INTERFACE 2 NODE xxx DE-ACTIVATED FROM INTERFACE Can this deactivation of slave nodes be avoided when using AMS and type 2 interface? The same model was run successfully using DT/NODA/CST.
Dear Team, I want to know about the TYPE 7 and TYPE 2, contact types and how to apply them. These contacts have mentioned in AOC 2017 Contest Model under Radioss section. Kindly provide the information & videos for its application.