Jump to content
Ravi H

Acusolve results are not matching with Expt results

Recommended Posts

Hi,


 


I am doing an analysis of louver fin radiator but my results are not matching with experiment.


Boundary conditions are,


 


air flow = velocity inlet(5.58 m/s), pressure outlet and inlet temp (293.3 K)


water flow = flow rate inlet(120 l/m), pressure outlet & inlet temp (353 K)


 


                 cfd result                            expt result


 


air outlet -  349.62K                              327.43 K


 


water outlet- 352.68 K                          347.14 K


 


 i tried to attach .acs file but its failed.


send me dropbox link i will attach file.


 


 


Thanks in advance


 


Regards


Ravi H


 


 


 


 


Share this post


Link to post
Share on other sites

Have you tried compressing the database file? TRy uploading after using this.


http://www.altairuniversity.com/2014/02/04/option-to-compress-acuconsole-database-while-closing-it/


 


On the the hand it might require detailed investigation, that might not be feasible via forum. Have you contacted your local HyperWorks Support ?


http://www.altairhyperworks.com/ClientCenterHWSupportProduct.aspx


Share this post


Link to post
Share on other sites

×
×
  • Create New...