Jump to content

.rad to hypermesh

Recommended Posts



Try the tutorial first , and before you follow the below go to  <installation_directory>\tutorials\hwsolvers\radioss and right click the TENSILE_0000.rad file. and then make sure the read protect is off,

Step 1:  Load the RADIOSS (Block) User Profile

1.Launch HyperMesh Desktop.

2.From the Preferences menu, select the User Profiles or from the toolbar, click the userprofile-24.png icon.

3.Select RADIOSS (Block120) and click OK.

Step 2:  Load the solver deck

1.Click File > Import > Solver Deck or click fileimportgeometry-24.png.

2.Click the Select File icon files_panel.png , navigate to <installation_directory>\tutorials\hwsolvers\radioss and open the TENSILE_0000.rad file.

3.Click Open.

4.Click Import.

5.Click Close to close the window.

Share this post

Link to post
Share on other sites

i don't have the geometry i have a mesh file when i try to import it i had this message : 


Error:      The file is not a 4.1 or 4.2 or 4.4  or 5.1 or 9.0 or 10.0 or 11.0 or 12.0 Radioss Block File (file version = 12)

                Resolution:  Quitting..

Share this post

Link to post
Share on other sites



Then you may have exported the model from HyperCrash RADIOSS V13 user profile.Could you please check this?

If you did so,it will not be opened in Radioss Block 12.0 version.You should export it from HyperCrash Radioss V12 or lower version and then try to import in HyperMesh.



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...