Jump to content
Sign in to follow this  
ahmedhussin

Exhaust system modelling

Recommended Posts

Hello


 



1. I am trying to model flow in exhaust gases with acusolve, I have inlet and two oulets , I am not sure in this case if backflow should be activated in the outlets or not , what is the difference between area exit option and mass flux option ,.....  Also the tempearture is diffcult to converge compared to other variables pressure, velocity ,eddy viscosity. I found the initial temperature in the conjugate heat transfer tutorial is not changed (set to zero) do I need to change initial temperature from nodal initial condition. Please advise me how to upload the acusolve to revise the model settings. Is it better to send it to your dropbox. the model produce temperatures far from reality with negative values . 


 


the gases are temperature of 550 K and the velocity is 40m/s at inlet, cooling flux of walls was set to -2500 W/m2


 


2. I would like to ask how to make acusolve start solving from last solution and not from run zero. 


 


3. I would like to ask if you are setting convective cooling coefficient to 25 W/m2.K and ambient temperature to 303. do I need to leave the flux to zero. 


 


Please advice how to make secure transfer of the acuconsule file to be revised. 


 


 


 


 


 


 


 


 




  •  


  •  

Share this post


Link to post
Share on other sites

Dear ahmed,


 


To restart the run from previous time steps 


 


while clicking acusolve icon for run,a dialog box open in which you must  click on the restart ON and at the top of the dialog box click the Restart button which goes to next box in which you have to give the last timestep number of your previous run  and Run the model


Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...