Jump to content
swapnilsahu0111

Optimisation CTETRA error

Recommended Posts

Hi,


 


I am doing the simple optimisation, which has inlet at one side and outlet on other. I have done CFD tetra mesh and want to perform a free shape optimisation. I am getting the error on running the solver. I have attached the screenshot.


post-36640-0-18575800-1438591340_thumb.j

post-36640-0-61352800-1438591348_thumb.j

Share this post


Link to post
Share on other sites

 ************************************************************************
 **                                                                    **
 **                                                                    **
 **                        OptiStruct 13.0.210                         **
 **                                                                    **
 **                  Design and Optimization Software                  **
 **                   from Altair Engineering, Inc.                    **
 **                                                                    **
 **                                                                    **
 **            Windows Workstation  (Build 9200)  METANEEL             **
 **        4 CPU:  AMD A8-6410 APU with AMD Radeon R5 Graphics         **
 **                        CPU speed  2000 MHz                         **
 **                     3101 MB RAM,  8895 MB swap                     **
 **                                                                    **
 ** Build tag: 0751393_5533130_Ce64RBW8UH12M:96526-000  4000000004000  **
 ************************************************************************
 **  COPYRIGHT © 1996-2015                 Altair Engineering, Inc.  **
 ** All Rights Reserved.  Copyright notice does not imply publication. **
 **         Contains trade secrets of Altair Engineering, Inc.         **
 ** Decompilation or disassembly of this software strictly prohibited. **
 ************************************************************************
 
 
 *** OptiStruct defaults set from:
   install config file: C:\Program Files\Altair\13.0\/hwsolvers/optistruct.cfg.
 
 
 NOTE # 9199
 MSGLMT=STRICT is active, all messages will be printed.
 You can suppress some less important warning messages by use of
  MSGLMT=BRIEF or UNREF (in config file or in the input data).
 
 NOTE # 1929
 Created RAM scratch area: total size 200 MB.
 
 
 *** See next message about line 2467 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2199       0     751     591     774     592"
 
 This line was interpreted as:
 2467:CTETRA, 2199, 0, 751, 591, 774, 592
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2468 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2200       0     751     591     592     804"
 
 This line was interpreted as:
 2468:CTETRA, 2200, 0, 751, 591, 592, 804
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2469 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2201       0     804     695     924     751"
 
 This line was interpreted as:
 2469:CTETRA, 2201, 0, 804, 695, 924, 751
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2470 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2202       0     804     695     751     591"
 
 This line was interpreted as:
 2470:CTETRA, 2202, 0, 804, 695, 751, 591
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2471 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2203       0     847     691     669     831"
 
 This line was interpreted as:
 2471:CTETRA, 2203, 0, 847, 691, 669, 831
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2472 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2204       0     883     565     699     877"
 
 This line was interpreted as:
 2472:CTETRA, 2204, 0, 883, 565, 699, 877
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2473 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2205       0     701     642     566     641"
 
 This line was interpreted as:
 2473:CTETRA, 2205, 0, 701, 642, 566, 641
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2474 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2206       0     701     923     884     641"
 
 This line was interpreted as:
 2474:CTETRA, 2206, 0, 701, 923, 884, 641
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2475 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2207       0     884     838     739     701"
 
 This line was interpreted as:
 2475:CTETRA, 2207, 0, 884, 838, 739, 701
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 
 *** See next message about line 2476 from file:
     H:/New folder (2)/Opti/shape.fem
  "CTETRA      2208       0     691     810     669     673"
 
 This line was interpreted as:
 2476:CTETRA, 2208, 0, 691, 810, 669, 673
 
 *** ERROR # 1000 *** in the input data:
 Incorrect data in field # 3.
  Expected INT > 0, found  INTEGER (0).
 
 *** More of ERROR messages # 1000 were suppressed...
 

************************************************************************

RESOURCE USAGE INFORMATION
--------------------------

 MAXIMUM MEMORY USED                                       100 MB
   IN ADDITION    200 MB RAMDISK AREA WAS ALLOCATED IN MEMORY
 MAXIMUM DISK SPACE USED                                     1 MB

************************************************************************


************************************************************************

COMPUTE TIME INFORMATION
------------------------

 EXECUTION STARTED                         Mon Aug 03 09:39:48 2015    
 EXECUTION COMPLETED                       Mon Aug 03 09:39:49 2015    
 ELAPSED TIME                                         00:00:00
 CPU TIME                                             00:00:00

************************************************************************

 
 
 *** PROGRAM STOPPED: FATAL ERROR(s) ENCOUNTERED.
 
                        ***** END OF REPORT *****
 
 For Useful OptiStruct Tips and Tricks, go to the URL:
 http://www.altairhyperworks.com/tips.aspx
 
************************************************************************
 Following warning messages appeared too many times
 and were suppressed:
    1000
 Total of 2740 repeat error message(s) were suppressed.
 To see more messages use "MSGLMT" control card in the data or config file.
 
************************************************************************
 
 There were 2750 error messages during input processing.
  The first message is repeated below:
 
 
  *** See next message about line 2467 from file:
      H:/New folder (2)/Opti/shape.fem
   "CTETRA      2199       0     751     591     774     592"
 
  *** ERROR # 1000 *** in the input data:
  Incorrect data in field # 3.
 
 
************************************************************************
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...