Contact non-convergence (again!)

[Samantha 0]

Hi,

 

I've previously had help from one of your colleagues with my model for which they suggested I do a Mesh-->Check--> Elements-->Penetration as I had a problem with my slide contact surfaces. I fixed the majority of these penetrations with the auto manager (not all were fixed) and tried to relaunch the calculation. However, now my model does not manage to converge and I don't fully understand why, even after reading up on all of the input fields in the contact menu. Any help would be greatly appreciated (model is attached)!

 

Thanks in advance.

151207_MD_01_A-42.hm