Jump to content
Sign in to follow this  
Konstantin Heiss

Laminate problem, Plies not consistent

Recommended Posts

Hello again,


since I have not received any answer, I have to repost this.

I got a problem with my plies. I got a flange in my model where two face meet each other and combine to one. I want to use only one laminate, but I don't know how I can realize it. As you see in the picture, the plies are stacked only in direction of the normal. I got three faces, which I combined to sets: Inside (left side of the picture), outside (right side of the picture) and the flange. As elements for the plies I chose inside + flange on one hand, on the otherside I chose outside + flange meaning the flange should have the exact same structure as the inside and outside face, there should only be a 90 degree ply (dark blue) dividing them. I only want to use one laminate and one property. Is there any possibility to realize that? I tried to change it with the normals and z0 options, but it did not work.
I hope I could explain it in an understandable way. If you need any other informations, please ask.



Kind regards,


Konstantin Heiss

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...