Jump to content
hiranwale_bharat

Hexmesh of model with multiple fillets

Recommended Posts

Hello,

 

I was wondering to hexmesh of a model , a part of which is shown in the image attached.(Image 1 Grey)

 

I always find myself in trouble when I have such fillets in the model.

 

Is it possible to make this mappable? I can use pentas upto 5% also. defeaturing is not allowed.

 

Also find attached another image (image 2 Blue). Which has fillets running over entire length of model.

 

What should be the approach for hexmeshing such objects with fillets?

 

Sorry for not sharing model and only the image.

 

Regards,

Bharat

Image_1_grey.jpg

Image_2_Blue.jpg

Share this post


Link to post
Share on other sites
On 9/28/2016 at 10:47 PM, Q.Nguyen-Dai said:

Here's my "10min" test (picture only of course!)

 

hex-mesh.png

@ Q Nguyen-Dai ,

 

Hello,

I am digging an old topic here. Can you please share the meshing procedure for the above part? I am specially concerned about the corner fillets at the bottom region.

 

Thanks and regards,

Bharat 

Share this post


Link to post
Share on other sites

×
×
  • Create New...