Jump to content
Sign in to follow this  
lucaspera18

OptiStruct Composite optimization number of ply shapes

Recommended Posts

Guest

Hi,

 

Please add the below line in .fem file (as this is not directly available from HyperMesh)

 

If you are using FSTOSZ to output sizing deck, it will look something like this in your .fem file:

 

OUTPUT,FSTOSZ. Continuation to this add the following shown in bold:

 

OUTPUT,FSTOSZ,YES,4,ADVFREE

 

By default each orientation bundle gets 4 plies. You can change this number to 2, 4 or 8 ply bundles.There are also other alogorithms avaialble like ADVMAN (Advanced Manufacturing) Please take a look at OptiStruct help for more information.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...