Jump to content
nhan lac

virtual wind tunnel always get stuck at 0.02%

Recommended Posts

I tested your .stmod and it is running with VWT 2017. Do you have AcuSolve installed on your machine and is the path to AcuSolve correctly mentioned in your VWT Preferences? 

So no issue with the model, very likely an installation issue on your machine. Please try the steps mentioned in the link above.

 

BTW, Wind tunnel dimensions have to much larger than what you have specified, else the default images might not look so good. 

 

Share this post


Link to post
Share on other sites
On 4/4/2017 at 5:56 AM, ydigit said:

I tested your .stmod and it is running with VWT 2017. Do you have AcuSolve installed on your machine and is the path to AcuSolve correctly mentioned in your VWT Preferences? 

So no issue with the model, very likely an installation issue on your machine. Please try the steps mentioned in the link above.

 

BTW, Wind tunnel dimensions have to much larger than what you have specified, else the default images might not look so good. 

 

 

folder path.PNG

Share this post


Link to post
Share on other sites
On 4/4/2017 at 5:57 AM, ydigit said:

Also send a screenshot of how the folder where your case is running looks like. This would give an estimate of where the VWT is stuck. 

 

insdie folder.PNG

Share this post


Link to post
Share on other sites

I am guessing this might be an issue with "space" in installation paths and the run folder. 

So best would be to install AcuSolve not in "Program Files" but a folder like c:\Altair...

Also do not use "Documents" folder for the run path, as internally at times it is interpreted as the old windows style "My Documents".

Old windows issues....

 

Share this post


Link to post
Share on other sites

Do you happen to have installation of VWT or AcuSolve in a path with "space" or "Program Files"? 

Is your run path "My Documents"? All these are still a problem for VWT to handle due to whitespace. 

 

Please post a screenshot of your VWT Preferences  edit > preferences > acusolve (in analysis)

Share this post


Link to post
Share on other sites

Hi,

 

I  have the same Problem. VWT always stucks at 0.02%.

The Troubleshooting tips mentioned before I have already checked.

 

- So there are no files like mesh_intersections.dat and/or mesh_intersections.nas in this folder

 

- Also I can find the following section in the vwtAnalysis.MeshSim.txt file

 

acuMeshSim: --------------------------------------------------------------
acuMeshSim:              Number of Nodes =
acuMeshSim:           Number of Elements =
...
acuMeshSim:            Total Memory Size =e+002 Mbytes

 

 

- The Folders CAD.DIR and MESHSIM.DIR also were created.

 

- In addition to that I checked if there is a smooth intersection between the wheels and the ground of the windtunnel.

 

- As a model I choose the VWT_Roadster from ther VWT-Library.

 

- In the attached picture below you can see the preferences I made.

 

- In the vwtAnalysis1.txt file I found the following, perhaps this could lead to an solution.

 

vwtAnalysis.txt:

acuRun: Mon Apr 16 10:37:17 2018
acuRun: acuRun
acuRun: Processing run 1 ...
acuRun: Hostname = DESKTOP-MPA263B
acuRun: Release  = 2017
acuRun: Core auto detection found 4 cores
acuRun: Reseting num_subdomains to 4
acuRun: num_processors (4) equal to num_threads (4)
acuRun: Reseting message_passing_type to openmp
acuRun: Add C:/AcuSolve/acusolve/win64/bin to PATH
acuRun: set PATH=C:/AcuSolve/acusolve/win64/bin;C:\AcuSolve\acusolve\win64\bin;C:\AcuSolve\acusolve\win64\base\bin;C:\AcuSolve\acusolve\win64\base\DLLs;C:\AcuSolve\acusolve\win64\base\lib\site-packages;C:\AcuSolve\acusolve\win64\abaqus-odb\lib;C:\AcuSolve\acusolve\win64\perl\bin;C:\AcuSolve\acusolve\win64\plugins\VWT;C:\AcuSolve\acusolve\win64\bin;C:\AcuSolve\acusolve\win64\base\Lib\site-packages\gone;C:\AcuSolve\acusolve\win64\base\bin;C:\AcuSolve\acusolve\win64\base\DLLs;C:\AcuSolve\acusolve\win64\base\Lib\site-packages;C:\Hyperworks\hwVirtualWindTunnel2017\unity\bin\win64;C:\Hyperworks\hwVirtualWindTunnel2017\hw\bin\win64;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Users\Gerhardus\AppData\Local\Microsoft\WindowsApps;;C:\AcuSolve\acusolve\win64\perl\bin
acuRun: Run acuPrep ...
acuRun: C:/AcuSolve/acusolve/win64/bin/acuPrep.exe -nst 4 -nsd 4
acuPrep:                         Date = Mon Apr 16 10:37:19 2018
acuPrep:                      Problem = vwtAnalysis
acuPrep:                          Run = 1
acuPrep:                     Hostname = DESKTOP-MPA263B
acuPrep:                     Platform = Whistler 6.2 unknown
acuPrep:                      Machine = win64
acuPrep:                      Release = 2017
acuPrep:                 Release date = Jan 18 2017
acuPrep:         Number of subdomains = 4
acuPrep:            Number of threads = 4
acuPrep:            Working directory = ACUSIM.DIR
acuPrep: ------------------------------------------------------------------
acuPrep: Reading ANALYSIS
acuPrep: Reading EQUATION
acuPrep: Reading AUTO_SOLUTION_STRATEGY
acuPrep: Processing AUTO_SOLUTION_STRATEGY
acuPrep: AUTO_SOLUTION_STRATEGY: creating and including "vwtAnalysis.ss.inc" ...
acuPrep: Reading TIME_SEQUENCE
acuPrep: Reading STAGGER( "flow" )
acuPrep: Reading STAGGER( "turbulence" )
acuPrep: Reading TIME_INCREMENT
acuPrep: Reading TIME_INTEGRATION
acuPrep: Reading LINEAR_SOLVER_PARAMETERS
acuPrep: Reading CONVERGENCE_CHECK_PARAMETERS
acuPrep: Reading ALGEBRAIC_MULTIGRID_PARAMETERS
acuPrep: Reading MATERIAL_MODEL( "Fluid_Material" )
acuPrep: Reading DENSITY_MODEL( "Fluid_Material" )
acuPrep: Reading VISCOSITY_MODEL( "Fluid_Material" )
acuPrep: Reading SPECIFIC_HEAT_MODEL( "Fluid_Material" )
acuPrep: Reading CONDUCTIVITY_MODEL( "Fluid_Material" )
acuPrep: Reading POROSITY_MODEL( "Fluid_Material" )
acuPrep: Reading MATERIAL_MODEL( "Air" )
acuPrep: Reading DENSITY_MODEL( "Air" )
acuPrep: Reading VISCOSITY_MODEL( "Air" )
acuPrep: Reading SPECIFIC_HEAT_MODEL( "Air" )
acuPrep: Reading CONDUCTIVITY_MODEL( "Air" )
acuPrep: Reading POROSITY_MODEL( "Air" )
acuPrep: Reading BODY_FORCE( "Gravity" )
acuPrep: Reading GRAVITY( "Gravity" )
acuPrep: Reading FWH_OUTPUT
acuPrep: Reading NODAL_OUTPUT
acuPrep: Reading DERIVED_QUANTITY_OUTPUT
acuPrep: Reading RUNNING_AVERAGE_OUTPUT
acuPrep: Reading TIME_AVERAGE_OUTPUT
acuPrep: Reading ERROR_ESTIMATOR_OUTPUT
acuPrep: Reading RESTART_OUTPUT
acuPrep: Reading NODAL_RESIDUAL_OUTPUT
acuPrep: Reading NODAL_INITIAL_CONDITION( "pressure" )
acuPrep: Reading NODAL_INITIAL_CONDITION( "velocity" )
acuPrep: Reading COORDINATE
acuPrep: Reading ELEMENT_SET( "Fluid" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Bottom" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Bottom" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Inlet" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Inlet" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Left" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Left" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Outlet" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Outlet" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Right" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Right" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Top" )
acuPrep: Reading SURFACE_OUTPUT( "Wind_Tunnel_Top" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "engine_comp" )
acuPrep: Reading SURFACE_OUTPUT( "engine_comp" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "exhaust" )
acuPrep: Reading SURFACE_OUTPUT( "exhaust" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "intakes" )
acuPrep: Reading SURFACE_OUTPUT( "intakes" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "lights_front" )
acuPrep: Reading SURFACE_OUTPUT( "lights_front" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "lights_rear" )
acuPrep: Reading SURFACE_OUTPUT( "lights_rear" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_1_frame" )
acuPrep: Reading SURFACE_OUTPUT( "rad_1_frame" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_1_in" )
acuPrep: Reading SURFACE_OUTPUT( "rad_1_in" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_1_out" )
acuPrep: Reading SURFACE_OUTPUT( "rad_1_out" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_2_frame" )
acuPrep: Reading SURFACE_OUTPUT( "rad_2_frame" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_2_in" )
acuPrep: Reading SURFACE_OUTPUT( "rad_2_in" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rad_2_out" )
acuPrep: Reading SURFACE_OUTPUT( "rad_2_out" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rim_FL" )
acuPrep: Reading SURFACE_OUTPUT( "rim_FL" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rim_FR" )
acuPrep: Reading SURFACE_OUTPUT( "rim_FR" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rim_RL" )
acuPrep: Reading SURFACE_OUTPUT( "rim_RL" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "rim_RR" )
acuPrep: Reading SURFACE_OUTPUT( "rim_RR" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "tire_FL" )
acuPrep: Reading SURFACE_OUTPUT( "tire_FL" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "tire_FR" )
acuPrep: Reading SURFACE_OUTPUT( "tire_FR" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "tire_RL" )
acuPrep: Reading SURFACE_OUTPUT( "tire_RL" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "tire_RR" )
acuPrep: Reading SURFACE_OUTPUT( "tire_RR" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "underbody" )
acuPrep: Reading SURFACE_OUTPUT( "underbody" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "upper_body" )
acuPrep: Reading SURFACE_OUTPUT( "upper_body" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "window_front" )
acuPrep: Reading SURFACE_OUTPUT( "window_front" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "window_left" )
acuPrep: Reading SURFACE_OUTPUT( "window_left" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "window_rear" )
acuPrep: Reading SURFACE_OUTPUT( "window_rear" )
acuPrep: Reading SIMPLE_BOUNDARY_CONDITION( "window_right" )
acuPrep: Reading SURFACE_OUTPUT( "window_right" )
acuPrep: Reading RUN
acuPrep: Processing RUN
acuPrep: Processing ANALYSIS
acuPrep: Processing EQUATION
acuPrep: Processing FIELD( "none" )
acuPrep: Processing TURBULENCE_MODEL_PARAMETERS
acuPrep: Processing USER_GLOBAL_DATA( "none" )
acuPrep: Processing MULTIPLIER_FUNCTION( "none" )
acuPrep: Processing RADIATION
acuPrep: Processing SOLAR_RADIATION
acuPrep: Processing PARTICLE_TRACE
acuPrep: Processing EXTERNAL_CODE
acuPrep: Processing REFERENCE_FRAME( "none" )
acuPrep: Processing MESH_MOTION( "none" )
acuPrep: Processing TIME_SEQUENCE
acuPrep: Processing STAGGER( "flow" )
acuPrep: Processing STAGGER( "turbulence" )
acuPrep: Processing TIME_INCREMENT
acuPrep: Processing CONVERGENCE_CHECK_PARAMETERS
acuPrep: Processing ALGEBRAIC_MULTIGRID_PARAMETERS
acuPrep: Processing TIME_INTEGRATION
acuPrep: Processing LINEAR_SOLVER_PARAMETERS
acuPrep: Processing GRAVITY( "none" )
acuPrep: Processing GRAVITY( "Gravity" )
acuPrep: Processing ROTATION_FORCE( "none" )
acuPrep: Processing MASS_HEAT_SOURCE( "none" )
acuPrep: Processing VOLUME_HEAT_SOURCE( "none" )
acuPrep: Processing MASS_SPECIES_SOURCE( "none" )
acuPrep: Processing VOLUME_SPECIES_SOURCE( "none" )
acuPrep: Processing MASS_FIELD_SOURCE( "none" )
acuPrep: Processing VOLUME_FIELD_SOURCE( "none" )
acuPrep: Processing BODY_FORCE( "none" )
acuPrep: Processing BODY_FORCE( "Gravity" )
acuPrep: Processing DENSITY_MODEL( "none" )
acuPrep: Processing DENSITY_MODEL( "Fluid_Material" )
acuPrep: Processing DENSITY_MODEL( "Air" )
acuPrep: Processing SPECIFIC_HEAT_MODEL( "none" )
acuPrep: Processing SPECIFIC_HEAT_MODEL( "Fluid_Material" )
acuPrep: Processing SPECIFIC_HEAT_MODEL( "Air" )
acuPrep: Processing VISCOSITY_MODEL( "none" )
acuPrep: Processing VISCOSITY_MODEL( "Fluid_Material" )
acuPrep: Processing VISCOSITY_MODEL( "Air" )
acuPrep: Processing VISCOELASTIC_MODEL( "none" )
acuPrep: Processing CONDUCTIVITY_MODEL( "none" )
acuPrep: Processing CONDUCTIVITY_MODEL( "Fluid_Material" )
acuPrep: Processing CONDUCTIVITY_MODEL( "Air" )
acuPrep: Processing DIFFUSIVITY_MODEL( "none" )
acuPrep: Processing POROSITY_MODEL( "none" )
acuPrep: Processing POROSITY_MODEL( "Fluid_Material" )
acuPrep: Processing POROSITY_MODEL( "Air" )
acuPrep: Processing MATERIAL_MODEL( "none" )
acuPrep: Processing MATERIAL_MODEL( "Fluid_Material" )
acuPrep: Processing MATERIAL_MODEL( "Air" )
acuPrep: Processing SURFACE_TENSION_MODEL( "none" )
acuPrep: Processing CONTACT_ANGLE_MODEL( "none" )
acuPrep: Processing FIELD_INTERACTION_MODEL( "none" )
acuPrep: Processing MULTI_FIELD_MODEL( "none" )
acuPrep: Processing EMISSIVITY_MODEL( "none" )
acuPrep: Processing SOLAR_RADIATION_MODEL( "none" )
acuPrep: Processing COORDINATE
acuPrep: Processing NODAL_INITIAL_CONDITION( "pressure" )
acuPrep: Processing NODAL_INITIAL_CONDITION( "velocity" )
acuPrep: Processing NODAL_OUTPUT
acuPrep: Processing DERIVED_QUANTITY_OUTPUT
acuPrep: Processing RUNNING_AVERAGE_OUTPUT
acuPrep: Processing TIME_AVERAGE_OUTPUT
acuPrep: Processing RESTART_OUTPUT
acuPrep: Processing ERROR_ESTIMATOR_OUTPUT
acuPrep: Processing NODAL_RESIDUAL_OUTPUT
acuPrep: Processing ELEMENT_SET( "Fluid" )
acuPrep: Processing FIELD_BOUNDARY_CONDITION( "none" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Bottom" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Inlet" )
acuPrep: *** ERROR: Eddy viscosity must be non-zero at inflow boundaries.
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Left" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Outlet" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Right" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "Wind_Tunnel_Top" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "engine_comp" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "exhaust" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "intakes" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "lights_front" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "lights_rear" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_1_frame" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_1_in" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_1_out" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_2_frame" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_2_in" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rad_2_out" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rim_FL" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rim_FR" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rim_RL" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "rim_RR" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "tire_FL" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "tire_FR" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "tire_RL" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "tire_RR" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "underbody" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "upper_body" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "window_front" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "window_left" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "window_rear" )
acuPrep: Processing SIMPLE_BOUNDARY_CONDITION( "window_right" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Bottom" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Inlet" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Left" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Outlet" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Right" )
acuPrep: Processing SURFACE_OUTPUT( "Wind_Tunnel_Top" )
acuPrep: Processing SURFACE_OUTPUT( "engine_comp" )
acuPrep: Processing SURFACE_OUTPUT( "exhaust" )
acuPrep: Processing SURFACE_OUTPUT( "intakes" )
acuPrep: Processing SURFACE_OUTPUT( "lights_front" )
acuPrep: Processing SURFACE_OUTPUT( "lights_rear" )
acuPrep: Processing SURFACE_OUTPUT( "rad_1_frame" )
acuPrep: Processing SURFACE_OUTPUT( "rad_1_in" )
acuPrep: Processing SURFACE_OUTPUT( "rad_1_out" )
acuPrep: Processing SURFACE_OUTPUT( "rad_2_frame" )
acuPrep: Processing SURFACE_OUTPUT( "rad_2_in" )
acuPrep: Processing SURFACE_OUTPUT( "rad_2_out" )
acuPrep: Processing SURFACE_OUTPUT( "rim_FL" )
acuPrep: Processing SURFACE_OUTPUT( "rim_FR" )
acuPrep: Processing SURFACE_OUTPUT( "rim_RL" )
acuPrep: Processing SURFACE_OUTPUT( "rim_RR" )
acuPrep: Processing SURFACE_OUTPUT( "tire_FL" )
acuPrep: Processing SURFACE_OUTPUT( "tire_FR" )
acuPrep: Processing SURFACE_OUTPUT( "tire_RL" )
acuPrep: Processing SURFACE_OUTPUT( "tire_RR" )
acuPrep: Processing SURFACE_OUTPUT( "underbody" )
acuPrep: Processing SURFACE_OUTPUT( "upper_body" )
acuPrep: Processing SURFACE_OUTPUT( "window_front" )
acuPrep: Processing SURFACE_OUTPUT( "window_left" )
acuPrep: Processing SURFACE_OUTPUT( "window_rear" )
acuPrep: Processing SURFACE_OUTPUT( "window_right" )
acuPrep: Processing FWH_OUTPUT
acuPrep: Processing VAO_OUTPUT
acuPrep: *** ERROR: Error has occurred: terminate RUN
acuPrep: ------------------------------------------------------------------
acuPrep:       Input  CPU/Elapse time = 6.100000e-002 9.400000e-002 Sec
acuPrep:       Proc.  CPU/Elapse time = 1.462500e+001 1.484500e+001 Sec
acuPrep:       Solar  CPU/Elapse time = 0.000000e+000 0.000000e+000 Sec
acuPrep:       DDC    CPU/Elapse time = 0.000000e+000 0.000000e+000 Sec
acuPrep:       Output CPU/Elapse time = 0.000000e+000 0.000000e+000 Sec
acuPrep:       Total  CPU/Elapse time = 1.468600e+001 1.493900e+001 Sec
acuPrep:            Total Memory Size = 2.010273e+002 Mbytes
acuRun: *** ERROR: error occurred executing acuPrep
acuRun: Mon Apr 16 10:37:35 2018
 

 

Perhaps someone can help me with this?

 

Thanks a lot in advance.

 

 

 

 

image.png

Share this post


Link to post
Share on other sites

The problem is with

acuPrep: *** ERROR: Eddy viscosity must be non-zero at inflow boundaries.

 

Please update to AcuSolve 2017.2 and additionally install the hotfix 2017.2.1

This issue should be fixed there.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...