Jump to content
Sign in to follow this  
chenjiaqi

error regarding automatically set formulation to regions

Recommended Posts

Hello,

 

Following recent practice we have been able to model metal parts using the thin conducting sheet regions and couple with circuit components. However, the last step in the physics check always gives us an error message: cannot determine formulation, as shown in the attached picture.

 

The error message provide no further clues to us how to fix it, and we believe there must be something beyond that we don’t know.

 

Please have a look into the latest model we made, which is much better than our previous work. It is very representative to what we are going to achieve. Most importantly we believe if you may help us solve this error we can expand the example to larger scale models.

 

 

Regards,

 

 

formulation.png

BusCell_P.FLU.7z

Share this post


Link to post
Share on other sites

Hello,

 

A few precautions must be considered when using non meshed coils and thin conducting regions in the same project. In fact, the formulation of the air volume around each one must be different, so both can not exist in the same air volume. To avoid that, you must create an air volume surrounding the non mesh coil, or the thin conductor region, to have thin conductor region and non mesh coils in two different air volumes.

 

I hope this helps!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...