Jump to content

Recommended Posts

Damage models play a decisive role in predicting the fracture phenomena that occur during metal forming or material testing. They may be classified into many categories based on energy, pore-growth micromechanics, porous material and continuum-damage mechanics.


AFDEX supports the following damage models as shown in Figure 1 in the current version.

1.     Cockroft & Latham Normalized

2.     McClintock

3.     Brozzo, Deluca & Rendina

4.     Oyane, Okimoto & Shima

5.     Rice & Tracey

6.     Freundenthal


Fig 1.png


Figure 1: Damage models in AFDEX


For predicting the crack propagation, AFDEX uses an improved node-splitting technique in the quadrilateral mesh system.

Figure 2 shows the history of the fracture formation made using the Brozzo et. Al damage model. It can be observed that the early crack propagates horizontally up to two thirds of the radius of the material. The crack growth is then finalized in the inclined direction.




Figure 2: History of fracture formation by the Brozzo et al. damage model


A detailed view of the fracture surfaces predicted using different damage models is presented in Figure 3.




Figure 3: Detailed view of Fracture surfaces


All the major damage models predicted acceptable solutions in terms of the slope of the tensile load drop in the fracture region. It can be observed from Figure 4 that the Freudenthal damage model came closest to the experiments.




Figure 4: Load vs. Elongation curve based comparison


For more details, reading the literature in the link below is recommended.

http://msjoun.gnu.ac.kr/pub/paper/2014/Evaluation of Damage.pdf


Cheers from AFDEX Support Team !


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...