Jump to content
Renga@MFRC

Enclosed die forging and sizing of a bevel gear - AFDEX Simulation

Recommended Posts

Hello everyone,

 

The figures below compare the AFDEX predictions and experiments of a bevel gear manufacturing process composed of an enclosed die forging stage and a consecutive sizing stage. As this is a representative process in near-net shape manufacturing, a precision simulation is required.

 

Capture1.PNG

 

Figure 1: Process 1 - Enclosed Die Forging

 

Capture2.PNG

 

Figure 2: Process 2 - Sizing

 

Picture4.png

 

Figure 3: Enclosed Die Forging - Comparison

 

Picture5.png

 

Figure 4: Sizing - Comparison

 

Cheers from AFDEX Support Team!

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...