Jump to content
Sign in to follow this  
yao

How does AcuSolve handle wall roughness?

Recommended Posts

Theory:

We derived our turbulence wall roughness formulation from "Viscous Fluid Flow" Second Edition, by Frank M. White, ISBN: 0-07-069712-4; Pages 426-429.

Basically, the law of the wall is given by

u+ = 1/k ln( y+ ) + B(k+) + Pc(Grad_P)

Where 
u+ = u / u* 
y+ = y * mu / u* 
k+ = k * u* / mu 
u = velocity 
y = distance to the wall 
mu = kinematic viscosity 
k = average roughness height 
u* = sqrt( tau_w / dens ) 
tau_w = shear at the wall 
dens = density 
k = 0.41 (Karman constant) 
B = wall function constant 
Pc = pressure correction

For smooth walls, B = 5.5. For rough walls, B is a function of k+, which is a function of wall shear (or u* to be exact). The exact equations are written in White's book above.

Given the above, effectively the roughness shifts the u+ curve down.

Practice:

In practice, one must consider the following:

1. The first mesh point MUST be larger than the roughness height. That is, other than the nodal point on the wall, all other points need to have y > k. Otherwise, the theory is incorrect; since the u+(y+) curve will go below zero.

2. On the other hand, we like to mesh such that y+ of the first node should not be over 300. At times, this criteria will contradict y > k condition. In this case, y+ of 300 should be sacrificed in favor of y > k.

3. All of the roughness theory and measurement come from experiments performed in air over sand paper (usually associated with the aero-space field). Hence, there is an assumption of Gaussian distribution of roughness, leading to a self similarity solution.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...