Jump to content

Analysis of springback phenomenon in a multistage precision cold forging process

Recommended Posts

Hello Forum users,


An automatic multi-stage precision cold forging process of a yoke was simulated with emphasis on springback phenomenon using an elastoplastic finite element method. The results are discussed below.




Figure 1. Yoke to be studied (cold forging)




Figure 2. Process design and simulation result of the 6-stage cold forging process




Figure 3. Returning process of the punch in Stage 5 – Contours of nodal velocity shown in the picture



Figure 4. Measurement of distances between measuring points at ears before and after the punch returning process


It was observed that the AFDEX predictions deviated from the experiment values by 16% in this example. 


Cheers from AFDEX Support Team !

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...