Jump to content
Louis Carlioz

Naming group created throught Inspect

Recommended Posts

I am using the Inspect commands to select edges or faces. Then at the end, there is the possibility to create a group based on the selection.

However, the space where you should write the group's name is always grayed out (see picture below) resulting in the default name all the time. Is there a possibility of using this option?




Share this post

Link to post
Share on other sites

Looking more closely at the script behind this function there is actually a parameter for this:


<Name Value="Show Edges"/>


But unfortunately, changing the name ("Show Edges") to something else is not taken into consideration.


Share this post

Link to post
Share on other sites

Hi Louis,


  • With the current implementation , Show_Edges group is hardcoded.
  • User cannot modify the group name.In case you would like to change the group name you would have to execute that step and call the renaming of the group. Which would also be recorded in your script.

Please let me know in case you have any other queries.



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...