Jump to content
Vinay1005

OS-1315: Modal Transient Dynamic Analysis of a Bracket

Recommended Posts

Hello sir

 

I’m working on a structural transient analysis and I’m facing some doubts. I kindly request for your suggestion.

 

Similar to OS-1315: Modal Transient Dynamic Analysis of a Bracket

 

Input: I’m working on the bracket which is of 2mm thickness. Constrain and excitation is at the same point of location(bolt connection)

Acceleration 50g

Nominal shock duration = 11ms

nominal shock shape = half sine

 

In OptiStruct:

 

In TIME STEP load collector i have used N=100 and increment=0.00011  (I have considered 100 steps for the time of 0.011seconds)

 

In TABLED1 load collector i have assigned x1=0 ,y=0, x2=0.0055, y=50, x3=0.011,y=0

 

In SPCD load collector i have assigned x=9810 (applying only along x direction)

 

In TLOAD1 load collector  i have used Type=Acceleration

 

Please let me know whether the input i have assigned is right are not.

 

Regards

Vinay

Share this post


Link to post
Share on other sites
On 9/5/2017 at 8:46 AM, Vinay1005 said:

Hello sir

 

I’m working on a structural transient analysis and I’m facing some doubts. I kindly request for your suggestion.

 

Similar to OS-1315: Modal Transient Dynamic Analysis of a Bracket

 

Input: I’m working on the bracket which is of 2mm thickness. Constrain and excitation is at the same point of location(bolt connection)

Acceleration 50g

Nominal shock duration = 11ms

nominal shock shape = half sine

 

In OptiStruct:

 

In TIME STEP load collector i have used N=100 and increment=0.00011  (I have considered 100 steps for the time of 0.011seconds)

 

In TABLED1 load collector i have assigned x1=0 ,y=0, x2=0.0055, y=50, x3=0.011,y=0

 

In SPCD load collector i have assigned x=9810 (applying only along x direction)

 

In TLOAD1 load collector  i have used Type=Acceleration

 

Please let me know whether the input i have assigned is right are not.

 

Regards

Vinay

@Vinay1005 can you send you file. im doing something similar and needed some help. thank you.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×