Jump to content
Sign in to follow this  

Issue with Solid Map

Recommended Posts



I want to create a solid mesh between two meshed surfaces, which will be shared surfaces to the solids they "belonged to" initially


What I did so far:

0. Working in ABAQUS profile.

1. Automesh (Trias, elm size = 1.5) surfaces of interest

2. With Solid Map, I tried to make a solid mesh starting from the bottom surface, towards the upper surface, along a straight line (curve should also work, but I kept it simple for now).



Bottom surface mesh is satisfactory.

Upper surface mesh is 'double'/ not a shared surface and does not follow surface edge.

Using the 'elm to match' option does not work, since this requires same amount of elms on both surfaces, which is not the case.


Thanks in advance!


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...