Jump to content

Solution Stability Issue

Recommended Posts



Mesh independent study is performed for one operating point to fix the mesh count in one of my problem.  The final fixed mesh count result was deviating by 1.5% for the selected operating point. 


The final fixed mesh is used to simulate for other operating points and their results deviate between 10-30%. To check the consistency of the result  the simulation is conducted for different operating point to check the stability of solution and found result changes with huge deviation.


If this problem persists on my cases, it would be difficult for us to relay on the tool. Requesting you to arrange for a meeting to discuss in detail about this issue ASAP.



Vignesh V.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...