Jump to content
fcolomb

Single Point Incremental forming

Recommended Posts

Hello all,

 

I am working on a SPIF simulation (sometihing like the image below), but I am still struggling on some basics concepts from RADIOSS, since I am new to it. Do you guys suggest any tutorial or reading for learning this? It has been a bit difficult to find tutorials in this direction. The main points I have difficult are regarding the creation of the tool path and also the set up of the Adaptive meshing refinement. I went through the help ADMESH info, but still I don't know which parameters to use and so on.

 

Thanks for considering this.

image.png.e4b2bf392274ff874c0a5bfac0550e40.png

Share this post


Link to post
Share on other sites
Guest

Hi,

We have many tutorials available in Help on incremental analysis. Please go through the same and practice so that you can understand better on the tool.

 

 

 

HF.PNG

Share this post


Link to post
Share on other sites

Thank you for the reply.

Hum, ok, these are on the Hyperform platform. I didn't get to it because I was fixed on Hypermesh with the Radioss profile. 

Is it much better to use Hyperform?  It seems that the hypermesh platform has more possibilities, don't know... But as I said, I am new to these kind of analysis. So sorry for the foolish questions.

Share this post


Link to post
Share on other sites
Guest

Hi,

HyperForm is an industry proven comprehensive simulation software solution for stamping and tooling industries, and so for all manufacturing kind of simulations I would recommend you to try with HyperForm.

For RADIOSS, you can go through https://www.youtube.com/watch?v=CxM52wP3_ew&list=PLQ7KUGFuVz4u5y3SvIEIU07427-gATaG6 video series which is a webinar on the basics of RADIOSS solver. 

 

Share this post


Link to post
Share on other sites

Thank you for the tutorial and hints George, I have been through all of them, they were good for learning Hyperform.

 

However, I couldn't find any content about continuous path, I still have no clue how to create the circular path of the tool and the setup for this analysis, which is different from the step forming one.

 

What I was thinking is to go for User Defined forming and with IMPDISP insert a tool path. But I don't know if I should insert coordinate points or if there is a way to input an equation with time dependency. Which is the best way to do it?

Thank you for the attention.

Share this post


Link to post
Share on other sites

Hi,

I am doing research on incremental forming for constructing Theoretical FLD i am using normal anisotropy model. for simulation i am using isotropic model.can I compare theoretical model and simulation model.

Thankyou

Edited by praveeng

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...