Jump to content
VigneshKPV

Parametric Study in AcuSolve

Recommended Posts

Hi,

 

I wanted to setup the parametric study for a fan flow analysis at different operating speeds by using HST-AcuSolve

 

It would be really helpful if it is possible to perform parametric study using hyperstudy. 

 

Regards,

Vignesh V.

Share this post


Link to post
Share on other sites

I followed the setup as shown in the video. But I couldn't see Next button activated to start the parametric study after define input variables. 

 

Please find the message after completing nominal run in hyperstudy as below

 

5 Warning: The following variables are disabled as they do not have corresponding parameters in resource file ( C:/Users/vvh/Desktop/DEFanTest/01_hst.tpl )

              Speeds ( var_Speeds )

 

Share this post


Link to post
Share on other sites

×
×
  • Create New...