Jump to content

Recommended Posts

Hi all,


Please advise if there is a way in which I can obtain difference heat maps for more than 1 antenna in the prediction rectangle.

for Example,  firstly load 4 antennas into the prediction rectangle using Edit --> Combine data --> Max value. Then, subtract this combined heat map with another combined heat map with 4 antennas which were already loaded using Edit --> Subtract --> Value (File, Linear) . So Its basically 4 antennas - 4 antennas.

Is it possible in ProMan.


Please advise


Have a great day




Share this post

Link to post
Share on other sites

Hi Balaji,


yes, you just need to save the intermediate results (e.g. superposing 4 Tx antennas) as a separate *.fpp file.

Then you can subtract the two files (e.g. including 4 Tx antennas each) in the usual way by loading the first *.fpp file and subtracting the second *.fpp file via Edit => Subtract File (Value, File, linear).


Best regards

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...