Jump to content
Teeratat

PARAM W3 is not found in Nastran profile

Recommended Posts

Hi guys, I am using HM in NX Nastran profile.

 

I am working in Sol 109.

 

I would like to define PARAM W3, but the PARAM W3 is not found in PARAM control cards.

 

001.JPG.a52835c6bafca145dd35db911268929d.JPG

 

So I try to add it in dat file manually. It is not working.

 

Please advise.

 

Thank you in advance.

Share this post


Link to post
Share on other sites
1 hour ago, tinh said:

Hi Teeratat,

just simply set unsupported_param = 1 and enter param W3,

you can also add other params

Capture.PNG.dd3a63b46893a61c8107236618fccb20.PNG

 

 

It is not working. There is no op2 and the error is shown in f06 file.

 

001.JPG.b271004a9bf905f409f8ea25fdb29bde.JPG

 

 *** USER FATAL MESSAGE 6011 (IFPCCP)
     THE NDDL DEFAULT TYPE OF PARAMETER W3       DIFFERS FROM THE TYPE DETERMINED FROM PARAM CARD DEFINITION.
     USER INFORMATION: NDDL TYPE IS S.P. REAL. PARAM TYPE IS INTEGER.
 ^^^ USER   FATAL   MESSAGE 9002 (IFPS)  
 ^^^ ERROR(S) ENCOUNTERED IN THE    MAIN BULK DATA SECTION   
 ^^^ SEE MESSAGES ABOVE. ERROR ENCOUNTERED IN MODULE    IFP,                                     
1                                                                             APRIL  20, 2018  NX NASTRAN  5/ 1/14   PAGE    25
                                                                                                                                    
0                                                                                                                                   
0                                                                                                                                   
                                                                                                                                    
                                                                                                                                    
 *** USER INFORMATION MESSAGE 4425 (PRTPRN)
     ONE OR MORE FATAL ERRORS HAVE OCCURRED.  THERE MAY BE MORE ERROR MESSAGES IN THE PRECEDING OUTPUT

 

 

Share this post


Link to post
Share on other sites

Hey Teeratat,

Do you really understand meaning of the message?

I think you have to input value for W3 as "300.0" but not "300"

 

USER INFORMATION: NDDL TYPE IS S.P. REAL. PARAM TYPE IS INTEGER.

Share this post


Link to post
Share on other sites
6 minutes ago, tinh said:

Hey Teeratat,

Do you really understand meaning of the message?

I think you have to input value for W3 as "300.0" but not "300"

 

USER INFORMATION: NDDL TYPE IS S.P. REAL. PARAM TYPE IS INTEGER.

 

I had tried to use 300.0, it worked!

 

Very thank for you answer.

tinh likes this

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...