Jump to content
Keonkim1991

Specific Elements for Stress Results

Recommended Posts

Hello,

 

I have a model that has already solved for stress/displacement analysis. 

Now, I have particular spots to look into more closely.

I know there is a group feature that allows element grouping, but with this feature, can I see the assigned group and the results (particular elements in my structure) in hyperview? 

I'd like to set those particular elements and see how the stresses change as I make structural modifications..

If so, please tell me how to apply this.

 

Thank you.

Share this post


Link to post
Share on other sites

Hello @Keonkim1991,

Greetings!!!

 

As the simulation , is already completed- you could load the d3plot (in case of LS-Dyna) or suitable output file to HyperView. 

 

You could select individual elements or create a set of elemets (MODEL>Create>Sets - then select the required elements in ENTITY ID's)  from CONTOUR option.

 

Also, go through this link, it might give you more insight - https://connect.altair.com/CP/SA/training/self_paced/hv_hg_intro/content/hvch2s6.htm

 

Let me know, if you found any other solution.

image.png.3dc675b670a85da406ab523fbb7e4c14.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...