Jump to content
ItalicBike

Link Modal Shape and Natural Frequencies to FRF Analysis

Recommended Posts

Hi,

 

i have to carry out a modal frequency response analysis with optistruct. I need to study the acceleration FRF of 3 nodes on a panel (with an impulse force applied) in a range 50-5000 Hz.

 

I create the EIGRL card with V1=0 and V2=6500, supposing to use the 30% more of the upper value needed for the FRF. My problem is that this process take a lot of time, i suppose because of the high number of mode to compute.

 

Since my geometry doesn't change, but i have to change just the load, can i carry out the modal analysis, once for all, and then link the results obtained to the FRF analysis? In order to not calculate every time the mode and save time.

 

Thanks for support.

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...