Jump to content
extrmDovahkiin

Difficulty acquiring good quality mesh

Recommended Posts

Hello, 
I've encountered quite a lot of difficulty in meshing the below provided part (STEP file).  It's a bearing house, a bearing fits into this part, and then the part is bolted onto the base of our robot. 
I've tried deleting the elements near the holes then using Morphing, projecting nodes onto the hole surface and then filling the gap with pyramid/tetra elements wherever i can, but the final mesh doesn't look right at all as you can see in the picture provided.


Regards,
Vinamra

bearing_house_3204_.stp

bearing_house1.PNG

bearing_house2.PNG

bearing_house3.PNG

bearing_house4.PNG

Share this post


Link to post
Share on other sites
On 6/20/2018 at 2:35 PM, tinh said:

You need to divide it into more blocks, morphing is not an approach

example zzz.hm

can you finish it base on this tip?

Capture.PNG.dd06bec6e3147a3d3a885df38dd181fd.PNG

Hi Tinh, 
Thanks for your reply on this, what I am more interested is in the approach you took to mesh it, the main problem with my method was that, due to the mesh flow direction, I had to delete the hole elements, then try to project the surrounding elements near the hole surface onto the hole surface, and it made a mess. So, can you tell me how you approached it? I'm quite new to meshing.
Sorry for the late reply.
Thanks again.

Share this post


Link to post
Share on other sites
On 6/20/2018 at 3:25 PM, Q.Nguyen-Dai said:

Here's my within-5-min mesh:

screenshot_78.png.3b3ed2e2591561eef81f9073ea593950.png

 

Hello Nguyen,
Thanks for your prompt reply and the mesh looks quite good, can you rather brief me up with the approach you took towards this model? I'm pretty new in meshing models, this would be really helpful to me.
Thanks again.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...