Jump to content
MartinM711

2D Native BL Mesh (Planar) Element kind and distribution

Recommended Posts

Hey,

 

I have the following issue during meshing my 2D airfoil with an obtuse trailing edge:

 

I would like to mesh my airfoil like that: BL-Mesh with quad elements from leading edge to trailing edge (upper and lower part of airfoil) and the vertical area at the trailing edge (photo: yellow 1D elements) with tria elements (therefore farfield instead of wall)  in order to avoid the quad mesh around the trailing edge (see photo with red quad BL elements). However, when doing this with the Tool "2D Native BL Mesh Planar" it says "selected elements do not form closed loop" (see photo). Therefore I would like to ask, if there is a possibility to avoid quad elements at a certrain part around the airfoil with the Tool 2D Native BL Mesh (Planar)...

 

Or is there a possibility to delete the quad elements around the trailing edge and remesh this area?

 

Thank you very much in advance for your help!

 

Cheers,

Martin

Zwischenablage02.jpg

Zwischenablage04.jpg

Zwischenablage06.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...