Jump to content
floriancure

Ensuring that Structure of Topology Optimization is connected to NonDesignSpace

Recommended Posts

Hello,

 

I have a problem using Inspire. I am doing a topology optimization of an upright.

The problem is that the structure which the solver outputs to me is not connected to all of my non design space.

The bearing at the bottom of this picture needs to be connected to both of the cylinders but is only connected to the top one.
I alrady tried to separate the bearing (1 constraint and the other 2 contraints) but that does not make any sence at all.
1824628371_Unbenannt2.JPG.b7c01700d32efeae0ce503714421e313.JPG

I also saw a picture, where it worked with nearly the same connectors.

The only difference was that the forces were not in the center of wheel but in tire contact patch.

http://cdn2.hubspot.net/hubfs/47251/APA_Folder/Webinar_.ppt_files/2016.05.10_Inspire-nCode_DL-Click2Cast.pdf?t=1529973239214

I already tried this, but it does not work for me.

 

 

Thank you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...